Login to the recorder
Log in the recorder as follows.
Screenshot 1
Click the [Login] button.
→The "Login" window will be displayed.
Important:
Depending of the firewall setting of Windows XP SP2, recorder information may sometimes not be displayed. Refer to page 6 for further information.
Step 1
Select the desired recorder and enter the password of the user level "Manager".
Note:
Only the recorders registered in advance can be selected on the "Login" window. Refer to page 14 for further information.
Step 2
Click the [OK] button.
→The connection status window will be displayed. When the connection is established, the recorder information (☞ page 9) will be displayed on the left side of the operation window.
The [Login] button on the operation window will also change to the [Logout] button . Click this but- ton to log out of the recorder.
18