Other available operations when displaying live images
When displaying live images, the following display functions are available.
•Frame display
•Sequential display
•Favorite display
•Map display
These display function can be started by clicking the respective button of the system control buttons.
Frame display
Live images from the camera will be displayed in the frame play. Display interval can be set by configuring "I Frame Interval" on the "Common Setup" tab of the "Recording/Event Setup" window (☞ page 35).
The default of "I Frame Interval" is "4". (The frame display switches the displayed image at 4 seconds interval.)
Important:
When the value set for "I Frame Interval" is changed, it also affects recording.
Screenshot 1
Click the [Frame display] button.
→The "Frame Display" window will be displayed.
Step 1
Select the desired recorder and the cameras, and then click the [OK] button.
The password registered when registered the recorder will be entered automatically.
Note:
Only the recorders registered in advance can be selected on the "Frame Display" window. Refer to page 14 for further information.
29