Panasonic WJ-RT416 manual Screenshot

Start/stop of the manual recording using this software (Manual Rec. Control)

It is possible to start and stop the manual recording using this software.

Screenshot 1

Select "Manual Rec. Control" (☞ page 34) from the pop- up menu.

→The "Manual Rec. Control" window will be displayed.

Step 1

Select "On" or "Off" to start or stop the manual record- ing.

On: Starts the manual recording using this software.

Off: Stops the manual recording using this software.

Step 2

Click the [Apply] button.

→The selected operation will be carried out.

Determination whether to enable or disable the alarm output from the AUDIO IN/ALARM OUT terminal on the rear of the recorder (Alarm Output Control)

It is possible to determine whether to enable or disable the alarm output from the AUDIO IN/ALARM OUT terminal on the rear of the recorder.

Screenshot 1

Select "Alarm Output Control" (☞ page 34) from the pop-up menu.

→The "Alarm Output Control" window will be displayed.

Step 1

Check the desired checkbox respective to the terminal from which the alarm output signal is to be output. Uncheck the checkbox to stop outputting the alarm out- put signal.

Step 2

To close from the "Alarm Output Control" window, click the [⋅] button at the right top of the window.

38