Error/alarm display area
The status of the current login recorder will be displayed with the error status icons and the alarm status icon. When the [ALM] icon is clicked, the alarm will be reset, and the displayed icon will disappear.
Refer to the operating instructions of the recorder for further information about the alarm reset.
Recorder control buttons
Login | Logout | Data Download |
Recorder Config. | Remote Talk |
Login/logout the recorder, operation of the recorder, download of recorded images and remote talk between the PC and the recorder can be made using these buttons.
Some operations cannot be made if logged in the recorder not as "Manager". Refer to the installation guide for fur- ther information about the operation restriction differences between the user levels. Refer to page 18 for how to log in the recorder.
The following are available using the recorder control buttons.
•Login/logout (☞ page 18)
•Configurations of the recorder (☞ page 34)
•Download of recorded images (☞ page 42)
•Remote talk (start/end) (☞ page 43)
System control buttons
Starting of each function of the monitoring software, displaying of the setup menu, etc. can be made using these but- tons.
The following are available using the system control buttons.
Monitor System Setup Sequential Display | Map | RT4Viewer | Exit | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Frame Display |
| Control Panel |
|
| ||
|
|
|
|
|
|
|
|
| My Favorite Display | Minimize | |||
•Configuration of the settings of the monitoring software (☞ page 44)
•Frame display (Function to display only
•Sequential display (Function to display images from a camera to camera sequentially at the interval set in advance) (☞ page 31)
8