ENGLISH
MAKING THE CONNECTIONS
CONNECTING A VIDEO COMPONENT FOR INPUT
Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from another video source:
(1)Locate the multicolored patch cords.
(2)Connect Video Cable (yellow) to the Video In of the back of the Singing Machine.
(3)Connect the other end of the Video Cable (yellow) to the Video Output on another video source such as a VCR.
(4)Set the FUNCTION SELECT to AUX mode and the MONITOR ON/OFF switch to ON.
(5)Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD knobs located under the monitor of the Singing Machine for the best picture quality.
REAR VIEW OF
SINGING MACHINE
VIDEO | AUX | |
IN | OUT IN | |
| L | |
| R | |
OUT |
|
REAR VIEW OF VCR
RL
VIDEO OUT | AUDIO OUT |
VIDEO INPUT
(Yellow Jack)VIDEO OUTPUT
(Yellow Jack)
AUDIO CONNECTION
Connect the unit to your TV or home stereo system using the white and red connections on the supplied patch cord. Plug the white end of the patch cord into the white AUX OUT jack on the unit. Plug the red end of the patch cord into the red AUX OUT jack on unit. Now connect the other end of the cable’s white (left channel) and red (right channel) plugs to your TV or home stereo system’s ‘AUDIO IN’ or ‘AUX IN’ jacks.
REAR VIEW OF
SINGING MACHINE
AUX
OUT IN
L
REAR VIEW OF TV
RL
VIDEO IN | AUDIO IN |
R
AUX OUTPUT |
| AUX OUTPUT |
| AUDIO INPUT |
| AUDIO INPUT | ||
L |
| R |
| R |
| L | ||
(White Jack) |
| (Red Jack) |
| (Red Jack) |
| (White Jack) | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
E9