Quick guide
ESearching for cable broadcasts
To change each item to the appropriate settings:
1Press a/bto select the menu, and then press ;.
Scrambled stations | [Yes] |
Search method | [Channel] |
Start frequency |
|
Network ID | [None] |
Symbol rate 1 |
|
Symbol rate 2 |
|
QAM modulation 1 |
|
QAM modulation 2 |
|
Reset |
|
Search start |
|
|
|
2Press a/b/c/dor 0_9 to select or input
the appropriate item/value, and then press
;.
3Press a/bto select “Search start”, and then press ;.
4Press c/dto select “Yes” to start searching cable broadcasts, and then press ;.
5The TV searches for, sorts and stores all the receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press 6.
Menu | Description | Selectable items | |
|
|
| |
Scrambled | Specifies if you |
| |
need to add | Yes, No | ||
stations | |||
services. |
| ||
|
| ||
|
|
| |
|
| Channel: Extracts all | |
|
| of information from a | |
|
| channel (quick, but | |
|
| needs corresponding | |
|
| TV stations). | |
|
| Frequency: Checks | |
|
| every frequency in | |
Search | Specifies how you | range (slow). | |
Quick*2: All services | |||
method | search channels. | are searched by | |
|
| ||
|
| one frequency. This | |
|
| menu works only | |
|
| when your cable | |
|
| provider provides | |
|
| the frequency and | |
|
| the network ID (e.g., | |
|
| Homing channel). | |
|
|
| |
Start |
| From 474.0_858.0 | |
frequency |
| MHz | |
|
|
| |
| Specifies the network. |
| |
| Set this to register |
| |
Network ID | only the specified | None, 0_65535 | |
network ID without | |||
|
| ||
| registering any special |
| |
| services. |
| |
|
|
| |
| The symbol rates |
| |
Symbol rate | are specified by the |
| |
cable provider. Input | 1000_9000 | ||
1*1 | |||
| the value received for |
| |
| CATV. |
| |
|
|
| |
| The symbol rates |
| |
Symbol rate | are specified by the |
| |
cable provider. Input | 1000_9000 | ||
2*1 | |||
| the value received for |
| |
| CATV. |
| |
QAM |
| 16, 32, 64, 128, 256 | |
modulation 1 |
| ||
|
| ||
|
|
| |
QAM |
| None, 16, 32, 64, | |
modulation 2 |
| 128, 256 |
ISet up “Symbol rate 2” if the cable provider uses several symbol rates.
JWhen “Quick” is selected, “Scrambled stations” is automatically set to “No”.
JWhen “Quick” is selected, “None” for the “Network ID” menu cannot be selected.
Analogue broadcast setting
The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna.
• To abort the initial auto installation in progress, press 6.
12