Sharp LC-46LE821E, LC-46LE811E, LC-40LE811E Connecting a PC, Displaying a PC image on the screen

Connecting a PC

Connecting a PC

HDMI connection

PC HDMI 1, 2, 3 or 4

n

HDMI-certified cable

PC	HDMI 2*
o
	p
 ø 3.5 mm stereo	 DVI/HDMI cable
minijack cable

*When using the HDMI 2 terminal, you must select the proper item in the “Audio select” menu depending on the type of HDMI cable connected (refer to page 28 for details).

EAfter connecting

You must also set “RGB” from the “Input select” menu when selecting “EXT 3” from the “INPUT” menu (Pages 15 and 40).

NOTE

•The PC input terminals are DDC1/2B-compatible.

•Refer to page 47 for a list of PC signals compatible with the TV.

Displaying a PC image on the screen

Selecting the picture size

You can select the picture size.

1Press f.

• The “Wide mode” menu displays.

2Press for a/bto select the desired item.

EXAMPLE

Analogue connection

PC	EXT 3*
q
r
 RGB cable	 ø 3.5 mm stereo
	minijack cable
PC	EXT 3*
s
t
 DVI/RGB conversion	 ø 3.5 mm stereo
cable	minijack cable

*When using the EXT 3 terminal, you must select “Video+Audio” in the “Audio select” menu (refer to page 28 for details).

Normal	Full
	Item
Normal	Keeps the original aspect ratio in a full
	screen display.
	For letterbox pictures. Bars may appear
Cinema	on the top and bottom with some
	programmes.
Full	An image fully fills the screen.
Dot by Dot	Displays an image with the same
	number of pixels on the screen.

NOTE

•You can also select an item by pressing fon the remote control unit.

•Connect the PC before making adjustments.

•Selectable picture size may vary with input signal type.

•Refer to page 37 for AV signals.

HDMI: 480i/480p/576i/576p/720p/1080i/1080p

ANALOGUE RGB: 576p/720p (50 Hz)/1080i

•The ANALOGUE RGB (PC) terminal (EXT 3) is not compatible with 480i/576i/1080p signals.

46