Basic adjustment
Channel settings
Menu
CH list | Setup |
:Enter | :Back |
View setting
Auto installation
Channel settings
Quick start
Individual setting
View setting
Auto installation
The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting for digital and analogue individually and reconfigure the settings after the initial auto installation has been completed.
1Go to “Menu” > “Setup” > “View setting” > “Auto installation”.
2Press c/dto select “Yes”, and then press
;.
3Press a/b/c/dto select the desired language, and then press ;.
NOTE
•PIN input is required when executing “Auto installation”. The default PIN is “1234”. To change the PIN setting, refer to Password/Lock settings (Page 33). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 50).
•You cannot set the Home/Store setting in “Auto installation” in the “Setup” menu. If you want to reconfigure those settings, automatically execute initial auto installation after executing “Reset” from the “Setup” menu.
4Press a/bto select the broadcast standard you want to search, and then press ;.
EDigital search
After selecting the service you want to search, either “Terrestrial” or “Cable”, refer to Digital broadcast setting on pages 11_12.
EAnalogue search
The TV searches for, sorts and stores all the receivable TV stations. Refer to Analogue broadcast setting on page 12.
View setting
Programme setup
You can reconfigure the DTV service settings automatically or manually.
1Go to “Menu” > “Setup” > “View setting” > “Channel settings” > “Programme setup”.
2Press a/bto select the broadcast standard you want to reconfigure, and then press ;.
NOTE
•PIN input is required when executing “Programme setup”. The default PIN is “1234”. To change the PIN setting, refer to Password/Lock settings (Page 33). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 50).
Digital setting
Terrestrial
You can reconfigure the following settings when you select “Terrestrial” in the initial auto installation or the “Auto installation” menu.
EAdditional search
Use this menu to add new services automatically after “Digital search” in the “Auto installation” menu has been completed.
EManual search
Add new services within a specified frequency band.
• Enter the frequency using 0_9 numeric buttons.
30