Preparation
Attaching the stand unit
• Before performing work, spread cushioning over the surface on which you will | the TV. This will prevent it from being damaged. |
CAUTION
•Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may | falling over. | ||
1 | Confirm that there are nine screws (four long | 4 | four short screws into the |
| screws and five short screws) with the stand |
| of the TV. |
| unit. |
|
|
2Attach the supporting post for the stand unit onto the base using the four long screws with a screwdriver as shown.
Supporting post
3the stand into the openings on the
of the TV (hold the stand so it will not the edge of the base area).
Soft cushion
5
1
2
NOTE
•To detach the stand unit, perform the steps in reverse order.
•A screwdriver is not supplied with this product.
•The stand base is made of glass. Therefore, be careful not to drop the stand base or apply pressure to it.
•Do not place heavy objects on the stand base.
7