Basic adjustment
Picture
Advanced
This TV provides various advanced functions for optimising the picture quality.
Go to “Menu” > “Setup” > “Picture” > “Advanced”.
This function adjusts the hue of a selected colour using a
C.M.S.-saturation
This function increases or decreases the saturation of a selected colour using a
C.M.S.-value
This function adjusts the brightness of a selected colour using a
Colour temp.
Adjusts the colour temperature to give the best white image.
| Item | |
High | White with bluish tone. | |
Intermediate tone between “High” and | ||
“Middle”. | ||
| ||
|
| |
Middle | Natural tone. | |
|
| |
Intermediate tone between “Middle” | ||
and “Low”. | ||
| ||
|
| |
Low | White with reddish tone. | |
|
| |
R/G/B Gain (LO), | Adjusts the white balance by changing | |
R/G/B Gain (HI) | the value of each item. |
Fine motion advanced
“Fine motion advanced” technology provides superior solutions for digital display picture quality removing motion blur (“High”, “Low”, “Off”).
NOTE
•This effect is greater on fast moving images.
•“Fine motion advanced” will have no effect in the following cases.
1)The type of signal received is a PC signal.
2)An OSD is being displayed.
3)Teletext is activated.
•If images appear blurred, set the “Fine motion advanced” to “Off”.
Gamma adjustment
Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of e2 to a minimum of f2.
Film mode
Automatically detects a
Active contrast
Automatically adjusts the contrast of an image according to the scene.
DNR
“DNR” produces a clearer image (“Auto”, “High”, “Middle”, “Low”, “Off”).
NOTE
•This function may not be available depending on the input signal type.
3D-Y/C
Provides high quality images with minimal dot crawl and cross colour noise by detecting changes in the image.
| Item | |
Standard | Normal adjustment. | |
Fast | Sets the optimum image quality for fast- | |
moving images. | ||
| ||
|
| |
Slow | Sets the optimum image quality for | |
|
NOTE
•
•
Monochrome
For viewing a video in black & white.
Range of OPC
The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e16 and a minimum of f16.
NOTE
•This function is available only when the “OPC” setting is set to “On” or “On:Display”.
•The maximum setting cannot be set to a smaller number than the minimum setting.
•The minimum setting cannot be set to a bigger number than the maximum setting.
•The maximum and minimum settings cannot be set to the same number.
•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.
27