Sharp LC-40LE811E, LC-46LE821E Connecting external devices, Video connections, Hdmi connection

Connecting external devices

EBefore connecting ...

•Be sure to turn off the TV and any devices before making any connections.

•Firmly connect a cable to a terminal or terminals.

•Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device.

•Refer to page 46 for connecting a PC to the TV.

NOTE

• The cables illustrated except as described in “(supplied accessory)” in pages 20_22 are commercially available items.

Video connections

HDMI connection

Example of connectable devices

EDVD player/recorder E Blu-ray player/recorder E Game console

The HDMI connections permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. Analogue/digital conversion is no longer necessary in the connected devices, which also would result in quality losses.

n o p

HDMI-certified cable

ø 3.5 mm stereo minijack cable

DVI/HDMI cable

DVI/HDMI conversion

Using a DVI/HDMI cable, the digital video signals of a DVD can also be played via the compatible HDMI connection. The sound must be fed in additionally.

•When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in clearly.

•Both HDMI and DVI use the same HDCP copy protection method.

EWhen using the HDMI 2 terminal

You must set the audio signal input source depending on the type of HDMI cable connected (refer to page 28 for details).

HDMI-certified cable

1Press bto select “HDMI 2” from the “INPUT” menu, and then press ;.

2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “PC input” > “Audio select” > select “HDMI (Digital)”.

DVI/HDMI cable

1Press bto select “HDMI 2” from the “INPUT” menu, and then press ;.

2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “PC input” > “Audio select” > select “HDMI+Analog”.

NOTE

•If a connected HDMI device is AQUOS LINK compatible, you can take advantage of versatile functions (Pages 23_25).

•Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified HDMI cable.

•When playing the HDMI image, the best possible format for the picture will be detected and set automatically.

•An ARC (Audio Return Channel) compatible audio receiver must be connected to the HDMI 1 terminal with an ARC-compatible cable.

Supported video signal

576i, 576p, 480i, 480p, 1080i, 720p, 1080p See page 47 for PC signal compatibility.

20