Other useful features
Setting when using external devices
Input source settings
Option
Input select
For setting the signal type of external equipment.
1Press bto select the input source for
setting the input signal (“EXT 1” or “EXT 3”) from the “INPUT” menu, and then press ;.
2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”.
| Item |
EXT 1 | Y/C, CVBS, RGB |
EXT 3 | COMPONENT, RGB |
NOTE
•If no (colour) image displays, try changing to another signal type.
•Check the operation manual of the external equipment for the signal type.
Option
Input label
You can label each input source with a custom description.
1Press bto select the desired input source from the “INPUT” menu, and then press ;.
2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”.
3Press a/b/c/dto select each character of
the new name for the input source, and then press ;.
CLEAR
BACK
END
4Repeat until the label is fully spelt out.
NOTE
•The label can be six characters or less.
•When you want to set an input source label of less than six characters, select “END” to set the name.
CH list
INPUT
TV
Switchable
NOTE
• You cannot change labels if the input source is “TV” or “USB”.
Skipping specified inputs
Option
Input skip
This setting allows you to skip the SCART, HDMI, RGB, ATV or DTV input on the input source selection operation.
Go to “Menu” > “Setup” > “Option” > “Input skip”.
Setup
Terminal setting
Input skip
[Yes]
[No]
[No]
[No]
[No]
[No]
NOTE
•When you select “ATV” or “DTV”, the skip function works only when using the INPUT bbutton on the front of the TV.
40