AQUOS LINK
Controlling HDMI devices using AQUOS LINK
EWhat is AQUOS LINK?
Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder,
NOTE
• AQUOS
• AQUOS LINK does not work while using time shift functions.
E What you can do with AQUOS LINK
✔One touch recording (DTV only)
You do not have to search for the remote control unit of your recording device. Press the REC Eor REC STOP Hbuttons to start/stop recording what you see on the recorder.
✔ One touch play
When the TV is in standby mode, it will automatically turn on and play back the image from the HDMI source.
✔ Single remote control operation
AQUOS LINK automatically recognises connected HDMI devices and you can control the TV and the devices as if using a universal remote control unit.
✔ Operating title list of external devices
In addition to displaying the TV’s own timer list (Page 18), you can also call up the external player’s top menu or AQUOS BD player’s/AQUOS recorder’s title list provided that the devices support AQUOS LINK.
✔ Multiple control of HDMI devices
You can select which HDMI device to operate using the “Link operation” menu or the <button.
NOTE
• When you use AQUOS LINK, make sure to use a certified HDMI cable.
•Point the remote control unit toward the TV, not to the connected HDMI device.
•Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified HDMI cable.
•Up to three HDMI recording devices, one AV amplifier and three players can be connected using this system.
•These operations affect the HDMI device selected as the current external source. If the device does not operate, turn on the device and select the appropriate external source using b.
•When you insert/remove HDMI cables or change connections, turn on all connected HDMI devices before turning on the TV. Confirm that picture and audio are correctly output by selecting “HDMI 1”, “HDMI 2”, “HDMI 3” or “HDMI 4” from the “INPUT SOURCE” menu.
AQUOS LINK connection
First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI CEC protocol.
NOTE
•Refer to the operation manual of the device to be connected for further details.
•After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’ power have been turned on. Change the external input source by pressing b, select the appropriate external source and verify the audiovisual output.
•The cables illustrated in the following explanation are commercially available items.
•The four buttons (G, I, V, H) connected by a green line are used for time shift operations for the time shift function.
23