Connecting external devices
SCART connection
Example of connectable devices
EVCR
EDVD player/recorder
q
r
VCRDecoder
SCART cable (supplied accessory)/Conversion cable
SCART cable
NOTE
•In cases when the decoder needs to receive a signal from the TV, make sure to select the EXT 1 terminal to which the decoder is connected in “Manual adjust” in the “Analogue setting” menu (Page 32).
•You cannot connect the VCR with decoder using a fully wired SCART cable when selecting “Y/C” under “EXT 1” in the “Input select” menu.
Y PB PR Component connection
(CB) (CR)
Example of connectable devices
EVCR
EDVD player/recorder
You will enjoy accurate colour reproduction and high quality images through the EXT 3 terminal when connecting a DVD player/recorder or other device.
s |
|
| t |
| (G) | (B) | (R) |
R L | Y | PB | PR |
|
| (CB) (CR) | |
AUDIO | COMPONENT | ||
Stereo conversion | RGB component | ||
cable* |
| cable (supplied | |
|
| accessory)/ | |
|
| Conversion cable | |
*The supplied conversion cable (AV cable) is only used for the EXT 2 terminal, not for the Audio IN/OUT terminal. Use a stereo conversion cable (commercially available) instead.
EAfter connecting
You must select the appropriate input source and input signal settings for component connection to enjoy high quality image through the EXT 3 terminal.
Selecting the component signal
1Press bto select “EXT 3” from the “INPUT” menu, and then press ;.
2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input select” > select “COMPONENT”.
Setting audio output
Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “PC input” > “Audio select” > select “Video+Audio”.
21