Sharp LC-40LE811E, LC-46LE821E, LC-46LE811E, LC-40LE821E operation manual Aquos Link setup

AQUOS LINK

Connecting an AQUOS BD player/AQUOS recorder via	Connecting an AQUOS BD
the AQUOS AUDIO speaker system	player/AQUOS recorder
	only

n

n

o

n

AQUOS BD player/AQUOS	AQUOS AUDIO speaker system
recorder
 HDMI-certified cable	 Optical audio cable

AQUOS LINK setup

AQUOS BD player/AQUOS recorder

*The ARC (Audio Return Channel) function works only when using the HDMI 1 terminal.

Basic operation
	Selecting channel key

Go to “Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set.

AQUOS LINK control

Set to “On” to enable HDMI CEC functions.

Auto power on

If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.

NOTE

• The factory default for this item is “Off”.

Selecting recorder

Here, you can select a recorder for the recording from several connected recorders.

NOTE

•If you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS recorder, the external source’s indication changes (e.g., from “HDMI 1” to “HDMI 1 (Sub)”).

This function allows you to select the channel of the connected HDMI device using the TV’s remote control unit.

1Press a/bto select the input source of the connected HDMI device you want to control

using the TV’s remote control unit, and then press ;.

2Press c/dto select “On”, and then press

;.

Using genre info

This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast.

Audio return channel (ARC)

If this function is set to “Auto”, the TV can send audio data for video content shown on the TV to a connected audio device with just one ARC-compatible cable. Using this function eliminates the need to use a separate digital or analogue audio cable.

Connection for using “Audio return channel”

•You need to use ARC-compatible cables/devices and connect to the HDMI 1 terminal to activate this function. The connection method is the same as the above Connecting an AQUOS BD player/AQUOS recorder only.

24