Basic adjustment
EManual adjust
Configure various settings for each service using the colour (R/G/Y/B) buttons.
Service | Service | Lock | CH skip | Old LCN |
no. | name |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lock | CH skip | Delete | Sort |
1Press a/bto select the desired service.
2Press the colour button on the remote control unit corresponding with the item you want to reconfigure.
•The ✔ mark indicates the operation is set to on. Each time the colour button is pressed, you can switch the corresponding operation on/off.
Buttons for “Manual adjust” operation
Lock | Press R button. |
When the service is locked, you must enter your PIN whenever you tune to the service.
CH skip | Press G button. |
|
|
Services with a ✔ mark are passed over when pressing :r/son the TV or remote control unit.
Delete | Press Y button. |
|
|
The selected service is deleted. If you want to watch the service you deleted once again, perform “Auto installation”, “Additional search”, or “Manual search”.
Sort | Press B button. |
|
|
The item position of services can be sorted.
1Press a/bto select the service whose
item position you want to move, and then press ;.
2Press a/bto move it to the desired position, and then press ;.
3Repeat steps 1 and 2 until all desired service items are sorted.
Cable
You can reconfigure the following settings when you select “Cable” in the initial auto installation or the “Auto installation” menu.
EAdditional search
Use this menu to add new services automatically after “Digital search” in the “Auto installation” menu has been completed. Follow steps 1to 5in Searching for cable broadcasts on page 12.
EManual search
Add new services within a specified frequency band. After setting the items on the following screen, the TV starts searching.
•Refer to the table about menu items in the right column on page 12.
Frequency |
Symbol rate |
MHz |
QAM modulation |
Search start |
EManual adjust
This function is the same as in “Terrestrial”. Refer to “Manual adjust” in “Terrestrial”.
31