JVC TM-2100PN manual Troubleshooting, Following are not malfunctions

Page 15

TROUBLESHOOTING

Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorised dealer or service centre for assistance.

Problems

Points to be checked

Measures (Remedy)

 

 

 

No power supply.

Is the power plug loosened or disconnected?

Firmly insert the power plug.

 

 

 

No picture with the

Is the video signal output from the connected

Set the connected component correctly.

power on.

component?

 

 

 

 

 

Is the input signal selected properly?

Select the required video signal input with the

 

 

Input select button. (See page 6.)

 

 

 

 

Is the video cable disconnected?

Connect the video signal cable firmly.

 

 

(See pages 11 and 12.)

 

 

 

No sound.

Is the audio signal output from the connected

Set the connected component correctly.

 

component?

 

 

 

 

 

Is the volume output set to minimum?

Adjust the speaker volume with the VOLUME/

 

 

SELECT buttons. (See page 6.)

 

 

 

 

Is the audio cable disconnected?

Connect the audio signal cable firmly.

 

 

(See pages 11 and 12.)

 

 

 

Shaking picture.

Is the monitor close to a device generating a

Move the device away from the monitor until the

 

strong magnetic field?

picture stabilises.

 

 

 

No colours, wrong

Is the colour system selected properly?

Set the COLOR SYSTEM in the <MENU> screen

colour, or dark picture.

 

mode to [AUTO] mode. (See page 7.)

 

 

 

 

Has the picture control setting (CONTRAST,

Set each picture control to the standard setting.

 

BRIGHT, CHROMA or PHASE) been changed?

(See page 6.)

 

 

 

Unnatural, irregularly

Is the monitor close to a speaker, magnet or any

Move the device away from the monitor and turn

coloured, or distorted

other device generating a strong magnetic field?

the monitor’s power off. Wait at least 30 minutes,

picture.

 

then turn the power on again.

 

 

 

Dark stripes appear

Is the aspect ratio set to 16:9?

Set the ASPECT RATIO in the <MENU> screen

at the top and bottom

 

mode to [4 : 3 (4 - 3)] (See page 7.)

of the screen, picture

 

When controlling externally, ASPECT RATIO

vertically squeezed.

 

should be set to [4 : 3 (4-3)].

 

 

(See pages 11 and 12.)

 

 

 

White peak portion of

Is the BRIGHTNESS P.S. function set to ON?

Set the BRIGHTNESS P.S. function in the

the picture (for

 

<MENU> screen mode to OFF. (See page 7.)

example, the lit part

 

When controlling externally, BRIGHTNESS P.S.

of a fluorescent lamp)

 

function should be set to OFF.

is dark, unclear, and

 

(See pages 11 and 12.)

the colour is blurred.

 

 

 

 

 

Front panel button

Are the operation buttons on the front panel

Set the CONTROL LOCK to OFF in the <SET-

does not function.

locked? ( Has CONTROL LOCK function set to

UP MENU> screen mode. (See pages 8 and 9.)

 

ON?)

 

 

 

 

The following are not malfunctions:

●When a bright still image (such as a white cloth) is displayed for a long period, it may appear to be coloured. This is due to the structure of the cathode ray tube and will be deleted when another image is displayed.

●You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static electricity on the CRT and is not harmful.

●The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality appears on the screen as well.

ENGLISH

13

LCT0053-002A-H (EN)

13

02.07.30, 2:46 PM

Page 14 Page 16
Image 15
Page 14 Page 16
Contents LCT0053-002A-H Colour Video Monitor02.07.30, 323 PM TM-2100PN Precautions Safety PrecautionsContents Front View Controls and FeaturesRear View HOW to Handle Basic Operations Picture AdjustmentBasic Operation Press the VOLUME/SELECT buttons to set HOW to USE the Menu FunctionsDisplay and Selection in the Menu Screen Mode Setting Press the Phase or Chroma button to select Menu itemsWhile pressing the Menu button, press Phase button Display and Selections in the SET-UP Menu Mode SettingSet-up menu items Purpose Settings Setting HOW to Initialise the SettingScreen Display and Selections in the SET-UP Menu Reset Mode Press the Power Switch to turn the power OFFExternal control switch Basic Connection Example Video a Connection Example Select Input a Video button  Video B Y/C Connection Example Select Input B Y/C button Cont’dFollowing are not malfunctions TroubleshootingSpecifications Pin No Asterisks * are used to indicate front panel dimensionsSignal Front View Side View02.07.30, 323 PM FARB-VIDEO-MONITOR Achtung SicherheitshinweiseInhalt Vorderansicht DIE Bedienelemente UND Ihre FunktionenRückansicht Grundsätzliche Bedienschritte BasisfunktionenBildeinstellung Das Menü Menu wird aufgerufen Gebrauch DER MenüfunktionenAufruf UND Anzeige IM MENÜ-MODUS Menu Einstellschritte Die Taste Menu drückenBei gedrückt gehaltener Taste Menu die Taste Phase drücken Die folgenden Menüpunkte sind einstellbarDas Menü SET-UP Menu wird auf dem Bildschirm gezeigt Einstellung der extern zu steuernden Zum Verlassen des Setup-Menümodus die Taste Menu drückenSetup-Menüpunkte Aufgabe Verriegelung der vorderen TastenAufruf DER Anfangseinstellungen Die Betriebsspannung mit dem Netzschalter ausschalten OFFEinstellung Externe Steuerung Einfaches AnschlussbeispielForts Störungssuche Technische Daten Erde C Pin-Nr SignalVorderansicht Seitenansicht Erde Y02.07.30, 323 PM Moniteur Video Couleur Avertissements Précautions DE SécuritéPrécautions DE Sécurité SommaireVUE DE Face Commandes ET CaractéristiquesVUE DE Derrière Réglage DE L’IMAGE Ajuster avec la touche VOLUME/SELECTPour Effectuer LES Opérations DE Base Fonctionnement DE Base’écran Menu est affiché Affichage ET Sélection Dans LE Mode D’ÉCRAN Menu RéglagePour Utiliser LES Fonctions DE Menu Appuyer sur la touche MenuPour Utiliser LES Fonctions Vous pouvez régler les items de menu suivants’écran SET-UP Menu est affiché Externe Aspect Ratio ou Règle la fonction de commandeItems de menu de Objectif Réglages Règle le niveau pour la fonction ’écrêtage de luminositéRéglage Pour Initialiser LE RéglageExemple DE Raccordement DE Base Commutateur de commande externeBase Suite Exemple DE Raccordement DELa suite n’est pas des mauvais fonctionnements EN CAS DE DifficultésTM-2100PN Caractéristiques TechniquesUnités mm No. de Signal BrocheVue de face Vue latérale Masse Y Masse C02.07.30, 323 PM Monitor Video a Colori Avvertenze Norme DI SicurezzaIndice Lato Anteriore Comandi E Loro CaratteristicheLato Posteriore USO Base Premere il tasto Power in modo da far accendere ’unitàRegolare quindi il parametro col tasto VOLUME/ Select Funzioni Base DELL’UNITAViene visualizzato lo schermo Menu Per regolare altri parametri, ripetere le procedure 2 eUSO Delle Funzioni DEL Menu Premere il tasto MenuUn contrassegno 3 appare accanto alla voce scelta Tenere premuto il tasto Phase e premere il tasto MenuDisplay E Selezioni Possibili NEL Menu SET-UP Menu Viene visualizzato il menu SET-UP MenuImposta la funzione di controllo Voci del menu Scopo RegolazioniBlocca il funzionamento dei tasti di Funzione del pannello anterioreImpostazione Ripristino Delle Impostazioni StandardPremere il tasto in modo da spegnere OFF l’unità Tenere premuti contemporaneamente i tasti MenuInterruttore di controllo dall’esterno UN Esempio DI CollegamentoVideocamera Seguenti non sono guasti DiagnosticaDati Tecnici Massa a terra Y Massa a terra C Visione anterioreVisione laterale Segnale Piedino02.07.30, 323 PM Monitor DE Video a Color Advertencias Precauciones DE SeguridadIndice Vista Frontal Mandos Y FuncionesVista Trasera Operacion Basica Presione el conmutador Power para conectar la alimentaciónAjuste empleando el botón VOLUME/SELECT USO DE LAS Operaciones BasicasPresione el botón Menu Presione el botón VOLUME/SELECT para ajustarUSO DEL Menu DE Funciones Indicacion Y Seleccion EN EL Modo Menu DE Pantalla AjusteSelección Indicacion Y Selecciones EN EL Modo SET-UP Menu AjusteAparecerá indicada la pantalla SET-UP Menu Próxima al item seleccionado aparecerá una marca deItemes del menú de Propósito Ajustes Mantenga presionado el botón de Menu y Phase Inicializacion DEL AjusteAjuste Conmutador de control externo Ejemplo DE Conexion BasicaVideocámara Las siguientes no son fallas Localizacion DE AveriasEspecificaciones Vista frontal Vista lateralNo. de Señal Clavija Memo Memo U-JMT
Top Page Image Contents