JVC TM-2100PN manual HOW to Handle Basic Operations, Picture Adjustment

HOW TO HANDLE BASIC

OPERATIONS

BASIC OPERATION

				Colour system indication
1. Press the POWER switch to turn on the power.				(PAL or NTSC)
		_ON : Power turns ON. (Power indicator: lit)
	ON		PAL
		—OFF :Power turns OFF. (Power indicator: unlit)
	OFF

POWER

2. Press the INPUT SELECT button to choose input.

Selects video/audio signals input to terminals on the rear panel.

	B		A
Y/C		VIDEO	VIDEO

		INPUT	Terminals on the rear panel
		SELECT
INPUT	SELECT	button	Video signal input	Audio signal input
		1 Input A	VIDEO A terminal	AUDIO A terminal
		(VIDEO)
		2 Input B	VIDEO B terminal
		(VIDEO)		AUDIO B terminal
		3 Input B	VIDEO B (Y/C) terminal
		(Y/C)

3.Press the VOLUME/SELECT buttons to adjust the speaker volume.

–		+	Press this button to display the speaker volume level on the
			screen.
	VOLUME/SELECT		+ : The Built-in speaker volume is increased. (00 = 50)

–: The Built-in speaker volume is decreased. (50 = 00) * Screen indication will disappear about 10 seconds after

operating.

PICTURE ADJUSTMENT

1. Press select button corresponding to the item you

want to adjust.	The item you select is displayed on the screen.
	1 PHASE ( ) : Phase control

2CHROMA ( ) : Chroma control

PHASE CHROMA BRIGHT CONTRAST 3	BRIGHT ( ) : Brightness control
4	CONTRAST ( ) : Contrast control

2. Adjust with the VOLUME/SELECT buttons.

–	+	Items	VOLUME/SELECT button
			–	+
VOLUME/SELECT		PHASE
			reddish	greenish
		(Phase)
		CHROMA	lighter	deeper
		(Chroma)
		BRIGHT	darker	brighter
		(Brightness)
		CONTRAST	lower	higher
		(Contrast)

*Screen indication will disappear about 10 seconds after operating.

6

With regard to Colour system indication

●With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the colour system indication appears for about 3 seconds on the screen while PAL or NTSC signals are being detected.

It does not appear when receiving B/ W signal or when no signal is input. See page 7 for COLOR SYSTEM setting.

00 ~ 50

VOLUME : 20

– +

–20 ~ +20

PHASE : 00

– +

Notes:

●Phase control is effective only in the NTSC colour system mode.

●Chroma control is not effective when receiving B/W or when no signal is input.

●When the Chroma control is set to level “ –20”, the picture turns monochrome.

●“NO EFFECT” is displayed (For about 3 seconds) when your selected function has no effect.

LCT0053-002A-H (EN) 6 02.07.30, 2:45 PM