TechniSat DIGIT MF4-S Initial installation procedure described here serves, Audio language

Page 12

(Fig. 5-1)

(Fig. 5-2)

In addition, if broadcast, the Dolby Digital signal (AC3) is available at this output.

4.5 Serial interface (RS 232)

The RS 232 interface is used for operating system updates as well as for pre-programming via a personal computer PC.

4.6 Mains power connection

The digital receiver should only be connected to the mains power supply once the unit has been completely connected to all other components in the system. This helps to avoid damage to the digital receiver or other components.

>When you have made all the connections, use the mains power cable supplied to connect the receiver with the mains power socket (230 V/50-60 Hz).

5 Initial installation

When you have read through the safety instructions, and have connected the receiver as described in Chapter4, switch on the unit as described in Chapter 7. When switching on the unit for the first time, a start window will be displayed, with the installation assistant AutoInstall. (Fig. 5-1).Use the instal- lation assistant to quickly and simply make the most important settings on your digital receiver.

To make the settings in each step of the installation, the remote control keys required are highlighted.

You can abort the initial installation at any time simply by pressing the red function key. Press the green function key to go back to the previous step in the installation procedure. Thus any entries made in error can be quickly corrected.

If you do not implement the initial installation, or if it is not completed, the receiver will commence operation with a stan- dard pre-programmed configuration.

The initial installation procedure described here serves

merely as an example. The exact initial installation procedu- re will depend on the settings you select. Please therefore fol- low the instructions displayed on screen closely.

Operating language:

>Press the OK key to open the display window for the

Operating language. (Fig. 5-2)

Use the up/down arrow keys to select the desired opera- ting language.

>Confirm by pressing OK.

Audio language

>Use the up/down arrow keys to select the prefer- red audio language. (Fig. 5-3)

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Digit MF4-S DiSEqCContents Electronic Programme Guide Changing basic programmingProgramme scan Service settings Operation with a rotating antennaIllustrations Sound On/Off Numeric keys OptionVCR Dear customer Please read this first Important operating instructionsChapter Disposal advice Safety adviceWhen not in operation HelpConnecting the DVB receiver to a satellite installation VCRConnections AnalogueDigital Initial installation Initial installation procedure described here servesOperating language Operating language. FigAntenna configuration Country selectionDiSEqC Position A/Option aIsipro programme list update. Fig Position A/Option BPosition B/Option B Updating SoftwareTerminating the installation assistant Operating languageOperating language Remote control code Time difference to GMT hoursCountry Standby clockAudio/Video settings Language Audio signalTV Scart mode Picture formatVCR Scart mode Antenna settingsDolby Digital AC3 Switching DiSEqC on or off Setting the switching matrixUser Additional LNC settings/LNC properties Switching on and off Rotating antennaSelecting a programme Using the Programme up/down keys Using the numeric keysUsing the Navigator Programme list Selecting a listIf you are using a Conax Smartcard, please note Point Calling up blocked programmesInformation box Receiving encrypted programmesSpecial functions Multi-feed optionsSelect starting time/picture Volume control TV/Radio switchingConax PIN Code Dolby Digital AC3 mode Return to last programme selectedDisplay time and programme information Additional programme informationTransponder information Freeze frameSleep timer Using the internal video text decoderUsing the video text decoder of your television set Video textSub-titles Electronic Programme Guide SFI SiehFernInfoMixed operation Stop pagingInterrupting the download procedure Downloading SFI dataDisplay electronic programme guide SFI functions allow you toNow table with current programme contents NextMore SFI timer programming SFI functionsSFI Information Deleting a SFI timer event Use the arrow keys up/down to mark the line Delete TimerSFI programme overview ProgrammesSFI overview by programme type genre Terminating SFIDisplay SFI overview for other programmes Timer recordings Manual programming of timersDate StartStop RepeatTimer overview Change timer programmingDelete timer programming Programming a new timer eventConfiguring the Favourites list Please noteCalling up programme list management Adding programmes to the Favourites list Marking blocks of programmesDeleting from the Total list Sorting programmesUse the arrow keys left/right to select Yes or No Programming the electronic programme guide Programme guideSelecting a channel Please noteStart category Updating timeUpdating SFI channelDefault setting Parental controlChanging the unit PIN Mode Selecting channelsProgramme scan search Automatic scanAutomatic scan Satellite scanSatellite scan Transponder scanTransponderscan SatelliteScan mode Manual scanAfter the scan Service settings SettingsService settings SortedActivate default setting UpdateDelete all programmes Updating the programme list IsiproAdapting programmes Update software Deleting programmesAdding TV resp. radio programmes Copying the settings System configuration Encryption/decoding systemOperation with a rotating antenna DiSEqC Easterly and Westerly limitsSetting the Eastern limit Setting the Western limitDeleting existing limits Delete limitsGeo-positioning Motor supports this functionGeographic longitude Geographic latitudeSetting a satellite position Latitude deg 11 ‘Setting a user-defined satellite position User satellite Adjusting the satellite antennaTest transponder/LNC configuration Use the arrow keys to mark the field Current satellite listAutomatic fine adjustment Autofocus Positioning antenna manuallySaving a satellite position SaveCurrent satellite list Addressing a satellite positionDeleting a satellite position Reference positionExternal unit installation FrequencyFrequency range Intermediate frequencySoftware update Service voltagePolarisation plane Receiver see satellite receiver SatelliteTechnical data LNC power supply Output digitalVideo parameters Output Video textTrouble-shooting guide Problem Possible cause SolutionProblem Possible cause Solution Annexure Co-ordinates of some German cities and towns City Degrees longitudeE Degrees latitude NCity Degrees longitude E Degrees latitude N Index AC3Scart Page Programme selection Using the programme up/down keys Using the programme listFor daily use

DIGIT MF4-S specifications

The TechniSat DIGIT MF4-S is a cutting-edge digital satellite receiver designed to cater to the needs of modern TV viewers. Boasting a compact design, this device is a perfect blend of form and function, enabling users to enjoy a wide array of features in an intuitive format.

One of the standout features of the DIGIT MF4-S is its support for high-definition (HD) broadcasting. With the ability to receive and decode both DVB-S2 and DVB-S signals, users can access a plethora of satellite channels, including free-to-air HD content and premium subscription services. The receiver supports various resolutions, ensuring that the viewing experience is optimized for today's high-definition televisions.

The DIGIT MF4-S is engineered with advanced technology to enhance user experience. The device incorporates a powerful processor that ensures quick channel switching and smooth navigation through menus. Its user-friendly interface is complemented by an electronic program guide (EPG), which facilitates easy navigation through current and upcoming broadcasts. This feature allows viewers to plan their viewing schedules without missing their favorite shows.

For those who value customization, the TechniSat DIGIT MF4-S offers extensive settings to personalize the user experience. Users can create their own channel lists, set reminders, and even customize parental controls to restrict access to certain content. In addition, the receiver is equipped with a USB port that enables users to connect external drives, allowing for the recording of live TV shows and timeshift functionality.

Another notable aspect of the DIGIT MF4-S is its connectivity options. The device is versatile, supporting both wired and wireless networks, which grants users the flexibility to connect to the internet for additional content. With integrated Multimedia Player compatibility, users can also play various multimedia formats, ensuring that the receiver doubles as a home entertainment hub.

Energy efficiency is also a key characteristic of the TechniSat DIGIT MF4-S, as it operates under environmentally friendly standards. With its low power consumption, users can enjoy their favorite programs without worrying about excessive electricity bills.

In conclusion, the TechniSat DIGIT MF4-S encompasses a range of advanced features, technologies, and characteristics that make it a leading choice among digital satellite receivers. Its combination of high-definition support, user-friendly interface, customization options, and connectivity features make it an excellent addition to any home entertainment setup.
Top Page Image Contents