TechniSat DIGIT MF4-S Selecting a programme Using the Programme up/down keys, Selecting a list

Page 22

(Fig. 7-1)

(Fig. 7-2)

7.2 Selecting a programme

7.2.1 Using the Programme up/down keys

>You may use the programme keys up/down either on the receiver or on the remote control to switch up or down one pro- gramme slot at a time.

7.2.2 Using the numeric keys

>You may use the numeric keys to enter the desired program- me number.

For example:

1

 

for programme slot 1

1,

then 4

for programme slot 14

2,

then 3, then 4

for programme slot 234

When entering prtogramme numbers consisting of several digits, you have approximately 3 seconds after pressing a key to complete the entry.

If you wish to enter a programme number consisting of only one or two digits, you can speed up the switching procedure by holding down the key on the last digit a little longer.

7.2.3 Using the Navigator (Programme list)

>Press OK.

The programme list navigator will be displayed. In TV mode, only TV programmes will be shown, and only radio programmes when in Radio mode. The programme currently selected is mar- ked. (Fig. 7-1)

>Now use the arrow keys up/down to mark the desired pro- gramme.

>Press the OK key to display the marked programme.

>Use the arrow keys up/down to move the market in the list by one line at a time.

>Use the arrow keys left/right to move back and forth in the list one page at a time.

7.2.3.1 Selecting a list

You receiver is equipped with several programme lists, designed to make it easier for you to find a programme. You may select your Favourites list (see Point 8.1), or view the alphabetically sorted Total List, or view a list sorted by Providers.

>Press the OK key. The active programme list will be displayed.

>Use the red function key Category to open a window showing the types of programme lists (Favourites list, Provider lists and Total list). The active type of programme list is mar- ked. (Fig. 7-2)

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Digit MF4-S DiSEqCContents Changing basic programming Electronic Programme GuideProgramme scan Service settings Operation with a rotating antennaIllustrations Sound On/Off Numeric keys OptionVCR Dear customer Important operating instructions Please read this firstChapter When not in operation Disposal adviceSafety advice HelpConnecting the DVB receiver to a satellite installation VCRAnalogue ConnectionsDigital Operating language Initial installationInitial installation procedure described here serves Operating language. FigDiSEqC Antenna configurationCountry selection Position A/Option aPosition B/Option B Isipro programme list update. FigPosition A/Option B Updating SoftwareOperating language Terminating the installation assistantOperating language Country Remote control codeTime difference to GMT hours Standby clockTV Scart mode Audio/Video settingsLanguage Audio signal Picture formatAntenna settings VCR Scart modeDolby Digital AC3 Setting the switching matrix Switching DiSEqC on or offUser Additional LNC settings/LNC properties Switching on and off Rotating antennaUsing the Navigator Programme list Selecting a programme Using the Programme up/down keysUsing the numeric keys Selecting a listInformation box If you are using a Conax Smartcard, please note PointCalling up blocked programmes Receiving encrypted programmesMulti-feed options Special functionsSelect starting time/picture TV/Radio switching Volume controlConax PIN Code Dolby Digital AC3 mode Return to last programme selectedTransponder information Display time and programme informationAdditional programme information Freeze frameUsing the video text decoder of your television set Sleep timerUsing the internal video text decoder Video textMixed operation Sub-titlesElectronic Programme Guide SFI SiehFernInfo Stop pagingDisplay electronic programme guide Interrupting the download procedureDownloading SFI data SFI functions allow you toNext Now table with current programme contentsMore SFI functions SFI timer programmingSFI Information SFI programme overview Deleting a SFI timer eventUse the arrow keys up/down to mark the line Delete Timer ProgrammesTerminating SFI SFI overview by programme type genreDisplay SFI overview for other programmes Timer recordings Manual programming of timersStop DateStart RepeatDelete timer programming Timer overviewChange timer programming Programming a new timer eventConfiguring the Favourites list Please noteCalling up programme list management Adding programmes to the Favourites list Marking blocks of programmesSorting programmes Deleting from the Total listUse the arrow keys left/right to select Yes or No Programming the electronic programme guide Programme guideSelecting a channel Please noteUpdating Start categoryUpdating time SFI channelParental control Default settingChanging the unit PIN Programme scan search ModeSelecting channels Automatic scanSatellite scan Automatic scanSatellite scan Transponder scanTransponderscan SatelliteManual scan Scan modeAfter the scan Service settings Service settingsSettings SortedDelete all programmes Activate default settingUpdate Updating the programme list IsiproAdapting programmes Deleting programmes Update softwareAdding TV resp. radio programmes Copying the settings Operation with a rotating antenna DiSEqC System configurationEncryption/decoding system Easterly and Westerly limitsDeleting existing limits Setting the Eastern limitSetting the Western limit Delete limitsGeographic longitude Geo-positioningMotor supports this function Geographic latitudeSetting a satellite position Latitude deg 11 ‘Test transponder/LNC configuration Setting a user-defined satellite position User satelliteAdjusting the satellite antenna Use the arrow keys to mark the field Current satellite listSaving a satellite position Automatic fine adjustment AutofocusPositioning antenna manually SaveCurrent satellite list Addressing a satellite positionDeleting a satellite position Reference positionFrequency range External unit installationFrequency Intermediate frequencyPolarisation plane Software updateService voltage Receiver see satellite receiver SatelliteTechnical data Video parameters Output LNC power supplyOutput digital Video textTrouble-shooting guide Problem Possible cause SolutionProblem Possible cause Solution Annexure Co-ordinates of some German cities and towns City Degrees longitudeE Degrees latitude NCity Degrees longitude E Degrees latitude N Index AC3Scart Page Using the programme list Programme selection Using the programme up/down keysFor daily use

DIGIT MF4-S specifications

The TechniSat DIGIT MF4-S is a cutting-edge digital satellite receiver designed to cater to the needs of modern TV viewers. Boasting a compact design, this device is a perfect blend of form and function, enabling users to enjoy a wide array of features in an intuitive format.

One of the standout features of the DIGIT MF4-S is its support for high-definition (HD) broadcasting. With the ability to receive and decode both DVB-S2 and DVB-S signals, users can access a plethora of satellite channels, including free-to-air HD content and premium subscription services. The receiver supports various resolutions, ensuring that the viewing experience is optimized for today's high-definition televisions.

The DIGIT MF4-S is engineered with advanced technology to enhance user experience. The device incorporates a powerful processor that ensures quick channel switching and smooth navigation through menus. Its user-friendly interface is complemented by an electronic program guide (EPG), which facilitates easy navigation through current and upcoming broadcasts. This feature allows viewers to plan their viewing schedules without missing their favorite shows.

For those who value customization, the TechniSat DIGIT MF4-S offers extensive settings to personalize the user experience. Users can create their own channel lists, set reminders, and even customize parental controls to restrict access to certain content. In addition, the receiver is equipped with a USB port that enables users to connect external drives, allowing for the recording of live TV shows and timeshift functionality.

Another notable aspect of the DIGIT MF4-S is its connectivity options. The device is versatile, supporting both wired and wireless networks, which grants users the flexibility to connect to the internet for additional content. With integrated Multimedia Player compatibility, users can also play various multimedia formats, ensuring that the receiver doubles as a home entertainment hub.

Energy efficiency is also a key characteristic of the TechniSat DIGIT MF4-S, as it operates under environmentally friendly standards. With its low power consumption, users can enjoy their favorite programs without worrying about excessive electricity bills.

In conclusion, the TechniSat DIGIT MF4-S encompasses a range of advanced features, technologies, and characteristics that make it a leading choice among digital satellite receivers. Its combination of high-definition support, user-friendly interface, customization options, and connectivity features make it an excellent addition to any home entertainment setup.
Top Page Image Contents