TechniSat DIGIT MF4-S manual Parental control, Changing the unit PIN, Default setting

Page 45

>To start the updating of SFI data manually, press the red function key Start now.

If the parameters applicable to the data channel used to download the SFI list have changed, you can use this menu to correct the parameters. The current transponder data is available from specialist retailers. Generally, though, you should not make any changes in this menu.

8.3 Parental control

Your receiver is equipped with a parental control function. This allows you to protect important functions (e.g. calling up the main menu) from unauthorised access. In addition, programmes and recordings that you have blocked can in future only be selected by first entering a four-digit PIN code (unit PIN).

To work on the Parental control menu, proceed as follows:

>Press the Menu key to call up the Main Menu.

>Use the arrow keys up/down to mark the line Settings.

>Confirm by pressing OK.

The sub-menu Settings will be displayed.

>Use the arrow keys up/down to mark the line Parental control.

>Confirm by pressing OK.

The menu Parental control will be displayed. (Fig. 8-10)

>Use the arrow keys up/down to move the marker around within the menu, and to change the individual positions as indicated. Please note any messages displayed on screen when you select a menu item.

8.3.1 Changing the unit PIN

The unit PIN is set to a default setting of 0000 at the factory.

>Press the OK key. The menu used for changing the unit PIN code will be displayed. (Fig. 8-11)

>Now use the numeric keys to enter the current unit PIN code.

(Default setting 0000)

>Use the numeric keys to enter the new unit PIN code.

>Repeat the entry.

>When you have completed changing the unit PIN code in this manner, you will automatically be taken back to the parental control menu.

Note!

Do not forget your unit PIN code. If you do forget it at some point, please consult your retail specialist!

(Fig. 8-10)

(Fig. 8-11)

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents DiSEqC Digit MF4-SContents Electronic Programme Guide Changing basic programmingProgramme scan Operation with a rotating antenna Service settingsSound On/Off Numeric keys Option IllustrationsVCR Dear customer Please read this first Important operating instructionsChapter Safety advice Disposal adviceWhen not in operation HelpVCR Connecting the DVB receiver to a satellite installationConnections AnalogueDigital Initial installation procedure described here serves Initial installationOperating language Operating language. FigCountry selection Antenna configurationDiSEqC Position A/Option aPosition A/Option B Isipro programme list update. FigPosition B/Option B Updating SoftwareTerminating the installation assistant Operating languageOperating language Time difference to GMT hours Remote control codeCountry Standby clockLanguage Audio signal Audio/Video settingsTV Scart mode Picture formatVCR Scart mode Antenna settingsDolby Digital AC3 Switching DiSEqC on or off Setting the switching matrixUser Additional LNC settings/LNC properties Rotating antenna Switching on and offUsing the numeric keys Selecting a programme Using the Programme up/down keysUsing the Navigator Programme list Selecting a listCalling up blocked programmes If you are using a Conax Smartcard, please note PointInformation box Receiving encrypted programmesSpecial functions Multi-feed optionsSelect starting time/picture Volume control TV/Radio switchingConax PIN Code Return to last programme selected Dolby Digital AC3 modeAdditional programme information Display time and programme informationTransponder information Freeze frameUsing the internal video text decoder Sleep timerUsing the video text decoder of your television set Video textElectronic Programme Guide SFI SiehFernInfo Sub-titlesMixed operation Stop pagingDownloading SFI data Interrupting the download procedureDisplay electronic programme guide SFI functions allow you toNow table with current programme contents NextMore SFI timer programming SFI functionsSFI Information Use the arrow keys up/down to mark the line Delete Timer Deleting a SFI timer eventSFI programme overview ProgrammesSFI overview by programme type genre Terminating SFIDisplay SFI overview for other programmes Manual programming of timers Timer recordingsStart DateStop RepeatChange timer programming Timer overviewDelete timer programming Programming a new timer eventPlease note Configuring the Favourites listCalling up programme list management Marking blocks of programmes Adding programmes to the Favourites listDeleting from the Total list Sorting programmesUse the arrow keys left/right to select Yes or No Programme guide Programming the electronic programme guidePlease note Selecting a channelUpdating time Start categoryUpdating SFI channelDefault setting Parental controlChanging the unit PIN Selecting channels ModeProgramme scan search Automatic scanSatellite scan Automatic scanSatellite scan Transponder scanSatellite TransponderscanScan mode Manual scanAfter the scan Settings Service settingsService settings SortedUpdate Activate default settingDelete all programmes Updating the programme list IsiproAdapting programmes Update software Deleting programmesAdding TV resp. radio programmes Copying the settings Encryption/decoding system System configurationOperation with a rotating antenna DiSEqC Easterly and Westerly limitsSetting the Western limit Setting the Eastern limitDeleting existing limits Delete limitsMotor supports this function Geo-positioningGeographic longitude Geographic latitudeLatitude deg 11 ‘ Setting a satellite positionAdjusting the satellite antenna Setting a user-defined satellite position User satelliteTest transponder/LNC configuration Use the arrow keys to mark the field Current satellite listPositioning antenna manually Automatic fine adjustment AutofocusSaving a satellite position SaveAddressing a satellite position Current satellite listReference position Deleting a satellite positionFrequency External unit installationFrequency range Intermediate frequencyService voltage Software updatePolarisation plane Receiver see satellite receiver SatelliteTechnical data Output digital LNC power supplyVideo parameters Output Video textProblem Possible cause Solution Trouble-shooting guideProblem Possible cause Solution City Degrees longitudeE Degrees latitude N Annexure Co-ordinates of some German cities and townsCity Degrees longitude E Degrees latitude N AC3 IndexScart Page Programme selection Using the programme up/down keys Using the programme listFor daily use

DIGIT MF4-S specifications

The TechniSat DIGIT MF4-S is a cutting-edge digital satellite receiver designed to cater to the needs of modern TV viewers. Boasting a compact design, this device is a perfect blend of form and function, enabling users to enjoy a wide array of features in an intuitive format.

One of the standout features of the DIGIT MF4-S is its support for high-definition (HD) broadcasting. With the ability to receive and decode both DVB-S2 and DVB-S signals, users can access a plethora of satellite channels, including free-to-air HD content and premium subscription services. The receiver supports various resolutions, ensuring that the viewing experience is optimized for today's high-definition televisions.

The DIGIT MF4-S is engineered with advanced technology to enhance user experience. The device incorporates a powerful processor that ensures quick channel switching and smooth navigation through menus. Its user-friendly interface is complemented by an electronic program guide (EPG), which facilitates easy navigation through current and upcoming broadcasts. This feature allows viewers to plan their viewing schedules without missing their favorite shows.

For those who value customization, the TechniSat DIGIT MF4-S offers extensive settings to personalize the user experience. Users can create their own channel lists, set reminders, and even customize parental controls to restrict access to certain content. In addition, the receiver is equipped with a USB port that enables users to connect external drives, allowing for the recording of live TV shows and timeshift functionality.

Another notable aspect of the DIGIT MF4-S is its connectivity options. The device is versatile, supporting both wired and wireless networks, which grants users the flexibility to connect to the internet for additional content. With integrated Multimedia Player compatibility, users can also play various multimedia formats, ensuring that the receiver doubles as a home entertainment hub.

Energy efficiency is also a key characteristic of the TechniSat DIGIT MF4-S, as it operates under environmentally friendly standards. With its low power consumption, users can enjoy their favorite programs without worrying about excessive electricity bills.

In conclusion, the TechniSat DIGIT MF4-S encompasses a range of advanced features, technologies, and characteristics that make it a leading choice among digital satellite receivers. Its combination of high-definition support, user-friendly interface, customization options, and connectivity features make it an excellent addition to any home entertainment setup.
Top Page Image Contents