TechniSat DIGIT MF4-S manual Geo-positioning, Motor supports this function, Geographic longitude

Page 57

with the available actions.

>Now use the arrow keys up/down to mark the line Set West limit.

>Confirm by pressing OK.

>To set the westerly limit, press the green function key

(West limit) and confirm the following screen prompt (Fig. 9-8)by pressing OK.

9.2 Geo-positioning

If the geographical co-ordinates of your location are known, and you have a suitable motor, this function will simplify finding individual satellite positions. The co-ordinates for some German cities are listed in the Annexure (Point 13).

Note! Only switch on the geo-positioning mode if your DiSEqC

motor supports this function.

>Call up the menu used for setting the rotating antenna, as described above.

>Use the arrow keys to mark the field Geo.Pos.

>Confirm by pressing OK. The menu used to enter the location will be displayed. (Fig. 9-9)

>Use the OK key to switch the geo-positioning function on or off.

>Use the arrow keys to mark the field used to enter the

Geographic longitude.

>Use the numeric keys to enter the geographic longitude.

>Now press the arrow key left.

>In this field, use the OK key to indicate whether you are entering a position longitude East (East) or longitude West (W).

>Now use the arrow keys to mark the field for entering

Geographic latitude.

>Use the numeric keys to enter the geographic latitude.

>Now press the arrow key left.

>In this field, use the OK key to indicate whether you are entering a position latitude North (N) or latitude South (S).

>Press the Back key to return to the LNC settings.

The data relating to your location must be entered as a decimal value, correct to one decimal point. As the co-ordinates are often stated in degrees, minutes and seconds, these must be converted to decimal values as follows:

The figure for degrees remains unaffected by the calculation. The minutes are divided by 60, and rounded to one decimal place. The result of this division is added to the degrees.

The seconds are not taken into consideration at all, as they do not

(Fig. 9-8)

(Fig. 9-9)

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents DiSEqC Digit MF4-SContents Electronic Programme Guide Changing basic programmingProgramme scan Operation with a rotating antenna Service settingsSound On/Off Numeric keys Option IllustrationsVCR Dear customer Please read this first Important operating instructionsChapter Safety advice Disposal adviceWhen not in operation HelpVCR Connecting the DVB receiver to a satellite installationConnections AnalogueDigital Initial installation procedure described here serves Initial installationOperating language Operating language. FigCountry selection Antenna configurationDiSEqC Position A/Option aPosition A/Option B Isipro programme list update. FigPosition B/Option B Updating SoftwareTerminating the installation assistant Operating languageOperating language Time difference to GMT hours Remote control codeCountry Standby clockLanguage Audio signal Audio/Video settingsTV Scart mode Picture formatVCR Scart mode Antenna settingsDolby Digital AC3 Switching DiSEqC on or off Setting the switching matrixUser Additional LNC settings/LNC properties Rotating antenna Switching on and offUsing the numeric keys Selecting a programme Using the Programme up/down keysUsing the Navigator Programme list Selecting a listCalling up blocked programmes If you are using a Conax Smartcard, please note PointInformation box Receiving encrypted programmesSpecial functions Multi-feed optionsSelect starting time/picture Volume control TV/Radio switchingConax PIN Code Return to last programme selected Dolby Digital AC3 modeAdditional programme information Display time and programme informationTransponder information Freeze frameUsing the internal video text decoder Sleep timerUsing the video text decoder of your television set Video textElectronic Programme Guide SFI SiehFernInfo Sub-titlesMixed operation Stop pagingDownloading SFI data Interrupting the download procedureDisplay electronic programme guide SFI functions allow you toNow table with current programme contents NextMore SFI timer programming SFI functionsSFI Information Use the arrow keys up/down to mark the line Delete Timer Deleting a SFI timer eventSFI programme overview ProgrammesSFI overview by programme type genre Terminating SFIDisplay SFI overview for other programmes Manual programming of timers Timer recordingsStart DateStop RepeatChange timer programming Timer overviewDelete timer programming Programming a new timer eventPlease note Configuring the Favourites listCalling up programme list management Marking blocks of programmes Adding programmes to the Favourites listDeleting from the Total list Sorting programmesUse the arrow keys left/right to select Yes or No Programme guide Programming the electronic programme guidePlease note Selecting a channelUpdating time Start categoryUpdating SFI channelDefault setting Parental controlChanging the unit PIN Selecting channels ModeProgramme scan search Automatic scanSatellite scan Automatic scanSatellite scan Transponder scanSatellite TransponderscanScan mode Manual scanAfter the scan Settings Service settingsService settings SortedUpdate Activate default settingDelete all programmes Updating the programme list IsiproAdapting programmes Update software Deleting programmesAdding TV resp. radio programmes Copying the settings Encryption/decoding system System configurationOperation with a rotating antenna DiSEqC Easterly and Westerly limitsSetting the Western limit Setting the Eastern limitDeleting existing limits Delete limitsMotor supports this function Geo-positioningGeographic longitude Geographic latitudeLatitude deg 11 ‘ Setting a satellite positionAdjusting the satellite antenna Setting a user-defined satellite position User satelliteTest transponder/LNC configuration Use the arrow keys to mark the field Current satellite listPositioning antenna manually Automatic fine adjustment AutofocusSaving a satellite position SaveAddressing a satellite position Current satellite listReference position Deleting a satellite positionFrequency External unit installationFrequency range Intermediate frequencyService voltage Software updatePolarisation plane Receiver see satellite receiver SatelliteTechnical data Output digital LNC power supplyVideo parameters Output Video textProblem Possible cause Solution Trouble-shooting guideProblem Possible cause Solution City Degrees longitudeE Degrees latitude N Annexure Co-ordinates of some German cities and townsCity Degrees longitude E Degrees latitude N AC3 IndexScart Page Programme selection Using the programme up/down keys Using the programme listFor daily use

DIGIT MF4-S specifications

The TechniSat DIGIT MF4-S is a cutting-edge digital satellite receiver designed to cater to the needs of modern TV viewers. Boasting a compact design, this device is a perfect blend of form and function, enabling users to enjoy a wide array of features in an intuitive format.

One of the standout features of the DIGIT MF4-S is its support for high-definition (HD) broadcasting. With the ability to receive and decode both DVB-S2 and DVB-S signals, users can access a plethora of satellite channels, including free-to-air HD content and premium subscription services. The receiver supports various resolutions, ensuring that the viewing experience is optimized for today's high-definition televisions.

The DIGIT MF4-S is engineered with advanced technology to enhance user experience. The device incorporates a powerful processor that ensures quick channel switching and smooth navigation through menus. Its user-friendly interface is complemented by an electronic program guide (EPG), which facilitates easy navigation through current and upcoming broadcasts. This feature allows viewers to plan their viewing schedules without missing their favorite shows.

For those who value customization, the TechniSat DIGIT MF4-S offers extensive settings to personalize the user experience. Users can create their own channel lists, set reminders, and even customize parental controls to restrict access to certain content. In addition, the receiver is equipped with a USB port that enables users to connect external drives, allowing for the recording of live TV shows and timeshift functionality.

Another notable aspect of the DIGIT MF4-S is its connectivity options. The device is versatile, supporting both wired and wireless networks, which grants users the flexibility to connect to the internet for additional content. With integrated Multimedia Player compatibility, users can also play various multimedia formats, ensuring that the receiver doubles as a home entertainment hub.

Energy efficiency is also a key characteristic of the TechniSat DIGIT MF4-S, as it operates under environmentally friendly standards. With its low power consumption, users can enjoy their favorite programs without worrying about excessive electricity bills.

In conclusion, the TechniSat DIGIT MF4-S encompasses a range of advanced features, technologies, and characteristics that make it a leading choice among digital satellite receivers. Its combination of high-definition support, user-friendly interface, customization options, and connectivity features make it an excellent addition to any home entertainment setup.
Top Page Image Contents