TechniSat DIGIT MF4-S Audio/Video settings, Picture format, Language Audio signal, TV Scart mode

6.3 Audio/Video settings

To optimise your digital receiver for use with your television set, you may make further settings in the menu Audio /Video settings.

>Press the Menu key to display the Main Menu.

>Use the arrow keys up/down to mark the line Settings.

>Confirm by pressing OK.

The sub-menu Settings will be displayed.(Fig. 6-4)

>Now use the arrow keys up/down to mark the line

Audio/Video Settings.

>Confirm by pressing OK. The menu Audio/Video Settings will be displayed. (Fig. 6-5)

>Use the arrow keys up/down to move the marker within the menu, and to change the individual items as indicated. When selecting a menu item, please note any messages displayed on screen. The following settings may be made:

6.3.1 Picture format

>Use the arrow keys left/right to set the picture format appropriate for your TV set: 4:3 or 16:9. This function provi- des the automatic adjustment of the picture format for your television set.

6.3.2 Language (Audio signal)

>Use the arrow keys left/right to select your preferred language in this line. This function will automatically select the preferred language, where available, following a scan.

6.3.3 Language (Sub-titles)

Your DVB receiver is equipped to display sub-titles. If the sub-title function is activated, and the language selected is being broadcast, these will be displayed automatically.

If the function is not activated, sub-titles can be switched on manual- ly. The availability of sub-titles is indicated by display of the message Sub-title selection. Please also note Point 7.13 of the operating

manual.

6.3.4 TV SCART mode

In this line, use the arrow keys left/right to set the parameter according to your TV set, to FBAS, RGB or S-Video. For standard

sets, select FBAS.

(Fig. 6-4)

(Fig. 6-5)

17