TechniSat DIGIT MF4-S manual Deleting existing limits, Setting the Eastern limit, Delete limits

Page 56

(Fig. 9-4)

(Fig. 9-5)

(Fig. 9-6)

(Fig. 9-7)

If there are no obstructions in the rotating radius of the dish, set the limits so the dish can be rotated a little beyond what is required for the outermost satellite you wish to receive.

9.1.1 Deleting existing limits

First you should delete any limit values that may have been stored.

>Use the arrow keys left/right to mark the column LNC Test.

>Now use the arrow keys up/down in the line Rotating antenna, and mark the field Continue.

>Confirm by pressing OK.

The menu used for setting the rotating antenna will now be displayed. (Fig. 9-4)

>Press the yellow function key Actions to open an additional window. (Fig. 9-5)

>Now use the arrow keys up/down to mark the line

Delete limits.

>Confirm by pressing OK to accept the action selected to the green function key.

>To delete the limits set,press the green function key Delete limits.

>Confirm the prompt displayed (Fig. 9-6)by pressing OK.

9.1.2 Setting the Eastern limit

>To enter the Eastern limit, first use the arrow keys to mark the field Save.

>Now use the arrow key right to turn the dish to the maximum possible, resp. the maximum desired East position.

>Press the yellow function key Actions to open a window with the available actions.

>Now use the arrow keys up/down to mark the line Set East limit.

>Confirm by pressing OK.

>To set the easterly limit, press the green function key (East limit) and confirm the following screen prompt (Fig. 9-7)by pressing OK.

9.1.3 Setting the Western limit

>To enter the Western limit, first use the arrow keys to mark the field Save.

>Now use the arrow key left to turn the dish to the maximum possible, resp. the maximum desired West position.

>Press the yellow function key Actions to open a window

56

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Digit MF4-S DiSEqCContents Programme scan Electronic Programme GuideChanging basic programming Service settings Operation with a rotating antennaIllustrations Sound On/Off Numeric keys OptionVCR Dear customer Chapter Please read this firstImportant operating instructions Disposal advice Safety adviceWhen not in operation HelpConnecting the DVB receiver to a satellite installation VCRDigital ConnectionsAnalogue Initial installation Initial installation procedure described here servesOperating language Operating language. FigAntenna configuration Country selectionDiSEqC Position A/Option aIsipro programme list update. Fig Position A/Option BPosition B/Option B Updating SoftwareOperating language Terminating the installation assistantOperating language Remote control code Time difference to GMT hoursCountry Standby clockAudio/Video settings Language Audio signalTV Scart mode Picture formatDolby Digital AC3 VCR Scart modeAntenna settings User Switching DiSEqC on or offSetting the switching matrix Additional LNC settings/LNC properties Switching on and off Rotating antennaSelecting a programme Using the Programme up/down keys Using the numeric keysUsing the Navigator Programme list Selecting a listIf you are using a Conax Smartcard, please note Point Calling up blocked programmesInformation box Receiving encrypted programmesSelect starting time/picture Special functionsMulti-feed options Conax PIN Code Volume controlTV/Radio switching Dolby Digital AC3 mode Return to last programme selectedDisplay time and programme information Additional programme informationTransponder information Freeze frameSleep timer Using the internal video text decoderUsing the video text decoder of your television set Video textSub-titles Electronic Programme Guide SFI SiehFernInfoMixed operation Stop pagingInterrupting the download procedure Downloading SFI dataDisplay electronic programme guide SFI functions allow you toMore Now table with current programme contentsNext SFI Information SFI timer programmingSFI functions Deleting a SFI timer event Use the arrow keys up/down to mark the line Delete TimerSFI programme overview ProgrammesDisplay SFI overview for other programmes SFI overview by programme type genreTerminating SFI Timer recordings Manual programming of timersDate StartStop RepeatTimer overview Change timer programmingDelete timer programming Programming a new timer eventConfiguring the Favourites list Please noteCalling up programme list management Adding programmes to the Favourites list Marking blocks of programmesUse the arrow keys left/right to select Yes or No Deleting from the Total listSorting programmes Programming the electronic programme guide Programme guideSelecting a channel Please noteStart category Updating timeUpdating SFI channelChanging the unit PIN Default settingParental control Mode Selecting channelsProgramme scan search Automatic scanAutomatic scan Satellite scanSatellite scan Transponder scanTransponderscan SatelliteAfter the scan Scan modeManual scan Service settings SettingsService settings SortedActivate default setting UpdateDelete all programmes Updating the programme list IsiproAdapting programmes Adding TV resp. radio programmes Update softwareDeleting programmes Copying the settings System configuration Encryption/decoding systemOperation with a rotating antenna DiSEqC Easterly and Westerly limitsSetting the Eastern limit Setting the Western limitDeleting existing limits Delete limitsGeo-positioning Motor supports this functionGeographic longitude Geographic latitudeSetting a satellite position Latitude deg 11 ‘Setting a user-defined satellite position User satellite Adjusting the satellite antennaTest transponder/LNC configuration Use the arrow keys to mark the field Current satellite listAutomatic fine adjustment Autofocus Positioning antenna manuallySaving a satellite position SaveCurrent satellite list Addressing a satellite positionDeleting a satellite position Reference positionExternal unit installation FrequencyFrequency range Intermediate frequencySoftware update Service voltagePolarisation plane Receiver see satellite receiver SatelliteTechnical data LNC power supply Output digitalVideo parameters Output Video textTrouble-shooting guide Problem Possible cause SolutionProblem Possible cause Solution Annexure Co-ordinates of some German cities and towns City Degrees longitudeE Degrees latitude NCity Degrees longitude E Degrees latitude N Index AC3Scart Page For daily use Programme selection Using the programme up/down keysUsing the programme list

DIGIT MF4-S specifications

The TechniSat DIGIT MF4-S is a cutting-edge digital satellite receiver designed to cater to the needs of modern TV viewers. Boasting a compact design, this device is a perfect blend of form and function, enabling users to enjoy a wide array of features in an intuitive format.

One of the standout features of the DIGIT MF4-S is its support for high-definition (HD) broadcasting. With the ability to receive and decode both DVB-S2 and DVB-S signals, users can access a plethora of satellite channels, including free-to-air HD content and premium subscription services. The receiver supports various resolutions, ensuring that the viewing experience is optimized for today's high-definition televisions.

The DIGIT MF4-S is engineered with advanced technology to enhance user experience. The device incorporates a powerful processor that ensures quick channel switching and smooth navigation through menus. Its user-friendly interface is complemented by an electronic program guide (EPG), which facilitates easy navigation through current and upcoming broadcasts. This feature allows viewers to plan their viewing schedules without missing their favorite shows.

For those who value customization, the TechniSat DIGIT MF4-S offers extensive settings to personalize the user experience. Users can create their own channel lists, set reminders, and even customize parental controls to restrict access to certain content. In addition, the receiver is equipped with a USB port that enables users to connect external drives, allowing for the recording of live TV shows and timeshift functionality.

Another notable aspect of the DIGIT MF4-S is its connectivity options. The device is versatile, supporting both wired and wireless networks, which grants users the flexibility to connect to the internet for additional content. With integrated Multimedia Player compatibility, users can also play various multimedia formats, ensuring that the receiver doubles as a home entertainment hub.

Energy efficiency is also a key characteristic of the TechniSat DIGIT MF4-S, as it operates under environmentally friendly standards. With its low power consumption, users can enjoy their favorite programs without worrying about excessive electricity bills.

In conclusion, the TechniSat DIGIT MF4-S encompasses a range of advanced features, technologies, and characteristics that make it a leading choice among digital satellite receivers. Its combination of high-definition support, user-friendly interface, customization options, and connectivity features make it an excellent addition to any home entertainment setup.
Top Page Image Contents