(Fig.
(Fig.
7.6Selecting a different language (TV mode) resp. station (Radio mode)
If a programme is broadcast in several languages, or with multi- channel sound, or if several radio programmes are available on a specific radio slot, this information will be displayed (Fig.
>Press the key Option. A list will now be displayed (Fig.
>Use the arrow keys up/down to mark the desired langua- ge, resp. the desired radio programme, and confirm by pres-
sing OK.
You may now listen to the programme in the language selected. Your digital receiver is also equipped to receive monaural programmes.
>Use the arrow keys left/right to choose between Mono channel 1 ( ), Mono channel 2 () and Stereo ( ).
7.6.1 Dolby Digital (AC3 mode)
Where a programme is broadcast with Dolby Digital sound, this will be indicated by the Dolby logo in the information box when you switch to the programme. If you have switched on the Dolby Digital (AC3) function in accordance with Point 6.3.6, this programme will then automatically be reproduced in this format.
If you have not enabled the Dolby Digital (AC3) function, you can switch to AC3 mode manually as follows:
>Press the Option key. Where available, a list of the currently available languages and Dolby Digital (AC 3) wawill be displayed on screen.
>Use the arrow keys up/down to mark the line Dolby Digital.
>Confirm by pressing OK.
You can now enjoy Dolby Digital sound for this programme. If you would like your receiver to reproduce Dolby Digitalbroadcasts auto- matically, proceed to make the settings as described in Point 6.3.6 for automatic AC3 reproduction.
7.7 Return to last programme selected
>Pressing the Back key on the remote control will take you back to the last programme previously selected.
>Press the key again to return to the programme previously selected.
26