TechniSat DIGIT MF4-S manual Copying the settings

Page 54

(Fig. 8-30)

(Fig. 8-31)

(Fig. 8-32)

>Press OK to go to the sub-menu Update software (Fig. 8-30).

To perform a software update, mark the line Update soft- ware.

>Switch the Update software function to On by pressing OK.

>In the line Update time use the numeric keys to enter the time at which the software update is to be carried out.

>To start the update of the operating software manually, press the red function key Test.

>Press the Menu key to return to normal operation.

Should the parameters of the data channel for downloading the soft- ware updates have changed, you can correct these manually in this menu, as described under Point 8.3.4 (manual programme scan).Current transponder data can be obtained from your specialist retailer. In general you should not make any changes in this menu.

Note:

The new software can be downloaded automatically only when the digital receiver is in stand-by mode. The downloading procedure is indicated by the display “SAtL” resp. “SAt0” to “SAt9”. Do not interrupt this pro- cedure by switching the receiver on or off.

Independently of whether you have switched the automatic software updating function on or off, the system will automatically check for the availability of a new operating software version for your digital recei- ver each time you switch on the receiver. If a new version is availa- ble, a corresponding message will be displayed on screen (Fig. 8-31). To start the software update, follow the instructions displayed on screen.

8.5.5 Copying the settings

You have the facility to copy all the settings, such as programme list, antenna settings, etc. of your digital receiver (sender) to another digi- tal receiver (receiver) of the same type, and using the same version of the operating software. (Fig. 8-32)

>To do this, connect the two receivers by means of a null modem cable.

>Switch on the (destination, receiving) receiver.

>To copy the settings, press any operating key on the (source, sending) receiver.

The settings of the source receiver will now by transmitted to the destination receiver. Please note any messages displayed

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Digit MF4-S DiSEqCContents Electronic Programme Guide Changing basic programmingProgramme scan Service settings Operation with a rotating antennaIllustrations Sound On/Off Numeric keys OptionVCR Dear customer Please read this first Important operating instructionsChapter When not in operation Disposal adviceSafety advice HelpConnecting the DVB receiver to a satellite installation VCRConnections AnalogueDigital Operating language Initial installationInitial installation procedure described here serves Operating language. FigDiSEqC Antenna configurationCountry selection Position A/Option aPosition B/Option B Isipro programme list update. FigPosition A/Option B Updating SoftwareTerminating the installation assistant Operating languageOperating language Country Remote control codeTime difference to GMT hours Standby clockTV Scart mode Audio/Video settingsLanguage Audio signal Picture formatVCR Scart mode Antenna settingsDolby Digital AC3 Switching DiSEqC on or off Setting the switching matrixUser Additional LNC settings/LNC properties Switching on and off Rotating antennaUsing the Navigator Programme list Selecting a programme Using the Programme up/down keysUsing the numeric keys Selecting a listInformation box If you are using a Conax Smartcard, please note PointCalling up blocked programmes Receiving encrypted programmesSpecial functions Multi-feed optionsSelect starting time/picture Volume control TV/Radio switchingConax PIN Code Dolby Digital AC3 mode Return to last programme selectedTransponder information Display time and programme informationAdditional programme information Freeze frameUsing the video text decoder of your television set Sleep timerUsing the internal video text decoder Video textMixed operation Sub-titlesElectronic Programme Guide SFI SiehFernInfo Stop pagingDisplay electronic programme guide Interrupting the download procedureDownloading SFI data SFI functions allow you toNow table with current programme contents NextMore SFI timer programming SFI functionsSFI Information SFI programme overview Deleting a SFI timer eventUse the arrow keys up/down to mark the line Delete Timer ProgrammesSFI overview by programme type genre Terminating SFIDisplay SFI overview for other programmes Timer recordings Manual programming of timersStop DateStart RepeatDelete timer programming Timer overviewChange timer programming Programming a new timer eventConfiguring the Favourites list Please noteCalling up programme list management Adding programmes to the Favourites list Marking blocks of programmesDeleting from the Total list Sorting programmesUse the arrow keys left/right to select Yes or No Programming the electronic programme guide Programme guideSelecting a channel Please noteUpdating Start categoryUpdating time SFI channelDefault setting Parental controlChanging the unit PIN Programme scan search ModeSelecting channels Automatic scanSatellite scan Automatic scanSatellite scan Transponder scanTransponderscan SatelliteScan mode Manual scanAfter the scan Service settings Service settingsSettings SortedDelete all programmes Activate default settingUpdate Updating the programme list IsiproAdapting programmes Update software Deleting programmesAdding TV resp. radio programmes Copying the settings Operation with a rotating antenna DiSEqC System configurationEncryption/decoding system Easterly and Westerly limitsDeleting existing limits Setting the Eastern limitSetting the Western limit Delete limitsGeographic longitude Geo-positioningMotor supports this function Geographic latitudeSetting a satellite position Latitude deg 11 ‘Test transponder/LNC configuration Setting a user-defined satellite position User satelliteAdjusting the satellite antenna Use the arrow keys to mark the field Current satellite listSaving a satellite position Automatic fine adjustment AutofocusPositioning antenna manually SaveCurrent satellite list Addressing a satellite positionDeleting a satellite position Reference positionFrequency range External unit installationFrequency Intermediate frequencyPolarisation plane Software updateService voltage Receiver see satellite receiver SatelliteTechnical data Video parameters Output LNC power supplyOutput digital Video textTrouble-shooting guide Problem Possible cause SolutionProblem Possible cause Solution Annexure Co-ordinates of some German cities and towns City Degrees longitudeE Degrees latitude NCity Degrees longitude E Degrees latitude N Index AC3Scart Page Programme selection Using the programme up/down keys Using the programme listFor daily use

DIGIT MF4-S specifications

The TechniSat DIGIT MF4-S is a cutting-edge digital satellite receiver designed to cater to the needs of modern TV viewers. Boasting a compact design, this device is a perfect blend of form and function, enabling users to enjoy a wide array of features in an intuitive format.

One of the standout features of the DIGIT MF4-S is its support for high-definition (HD) broadcasting. With the ability to receive and decode both DVB-S2 and DVB-S signals, users can access a plethora of satellite channels, including free-to-air HD content and premium subscription services. The receiver supports various resolutions, ensuring that the viewing experience is optimized for today's high-definition televisions.

The DIGIT MF4-S is engineered with advanced technology to enhance user experience. The device incorporates a powerful processor that ensures quick channel switching and smooth navigation through menus. Its user-friendly interface is complemented by an electronic program guide (EPG), which facilitates easy navigation through current and upcoming broadcasts. This feature allows viewers to plan their viewing schedules without missing their favorite shows.

For those who value customization, the TechniSat DIGIT MF4-S offers extensive settings to personalize the user experience. Users can create their own channel lists, set reminders, and even customize parental controls to restrict access to certain content. In addition, the receiver is equipped with a USB port that enables users to connect external drives, allowing for the recording of live TV shows and timeshift functionality.

Another notable aspect of the DIGIT MF4-S is its connectivity options. The device is versatile, supporting both wired and wireless networks, which grants users the flexibility to connect to the internet for additional content. With integrated Multimedia Player compatibility, users can also play various multimedia formats, ensuring that the receiver doubles as a home entertainment hub.

Energy efficiency is also a key characteristic of the TechniSat DIGIT MF4-S, as it operates under environmentally friendly standards. With its low power consumption, users can enjoy their favorite programs without worrying about excessive electricity bills.

In conclusion, the TechniSat DIGIT MF4-S encompasses a range of advanced features, technologies, and characteristics that make it a leading choice among digital satellite receivers. Its combination of high-definition support, user-friendly interface, customization options, and connectivity features make it an excellent addition to any home entertainment setup.
Top Page Image Contents