TechniSat DIGIT MF4-S Time difference to GMT hours, Country, Remote control code, Standby clock

Page 16

>Now use the arrow keys up/down to mark the line Basic Settings.

>Confirm by pressing OK. The menu Basic Settings will be displayed. (Fig. 6-3)

>Use the arrow keys up/down to move the marker within the menu, and to change the individual positions as shown. When selecting a menu item please also note any messages displayed on screen. The following settings may be made:

(Fig. 6-3)

6.2.1 Time difference to GMT (hours)

Your unit is equipped with a clock. This is synchronised via satellite with Greenwich Mean Time.

If in the category Country (Point 6.2.2) you have selected the set- ting None, then you must simply correct the clock time correspon- ding to your local time using the arrow keys left/right. In the case of Germany, the difference is

+1 hour in winter, +2 hours in summer.

6.2.2 Country

This function enables the automatic change from standard to daylight savings (summer/winter) time.

>Use the arrow keys left/right to enter your location in the line Country.

6.2.3 Remote control code

Your receiver may be operated by means of the remote control unit supplied (remote control code SAT2) or with an optional remote con- trol using the remote control code SAT1. In this line you must decide whether you wish to allocate the remote control option SAT1 or SAT2 to your receiver.

>To do this, press down the OK key as well as either the

SAT1 or SAT2 key simultaneously.

Press the Back key to return to the menu Settings, or press the Menu key to return to normal operation. The set- tings will be saved to memory automatically.

6.2.4 Standby clock

In this line you must decide whether the time should be displayed on the receiver while it is in stand-by mode.

>In this line, use the arrow keys left/right to set the mode of the standby clock to on or off.

>Press the Back key to return to the menu Settings, or press the Menu key to return to normal operation. The set- tings will be saved to memory automatically.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Digit MF4-S DiSEqCContents Changing basic programming Electronic Programme GuideProgramme scan Service settings Operation with a rotating antennaIllustrations Sound On/Off Numeric keys OptionVCR Dear customer Important operating instructions Please read this firstChapter Disposal advice Safety adviceWhen not in operation HelpConnecting the DVB receiver to a satellite installation VCRAnalogue ConnectionsDigital Initial installation Initial installation procedure described here servesOperating language Operating language. FigAntenna configuration Country selectionDiSEqC Position A/Option aIsipro programme list update. Fig Position A/Option BPosition B/Option B Updating SoftwareOperating language Terminating the installation assistantOperating language Remote control code Time difference to GMT hoursCountry Standby clockAudio/Video settings Language Audio signalTV Scart mode Picture formatAntenna settings VCR Scart modeDolby Digital AC3 Setting the switching matrix Switching DiSEqC on or offUser Additional LNC settings/LNC properties Switching on and off Rotating antennaSelecting a programme Using the Programme up/down keys Using the numeric keysUsing the Navigator Programme list Selecting a listIf you are using a Conax Smartcard, please note Point Calling up blocked programmesInformation box Receiving encrypted programmesMulti-feed options Special functionsSelect starting time/picture TV/Radio switching Volume controlConax PIN Code Dolby Digital AC3 mode Return to last programme selectedDisplay time and programme information Additional programme informationTransponder information Freeze frameSleep timer Using the internal video text decoderUsing the video text decoder of your television set Video textSub-titles Electronic Programme Guide SFI SiehFernInfoMixed operation Stop pagingInterrupting the download procedure Downloading SFI dataDisplay electronic programme guide SFI functions allow you toNext Now table with current programme contentsMore SFI functions SFI timer programmingSFI Information Deleting a SFI timer event Use the arrow keys up/down to mark the line Delete TimerSFI programme overview ProgrammesTerminating SFI SFI overview by programme type genreDisplay SFI overview for other programmes Timer recordings Manual programming of timersDate StartStop RepeatTimer overview Change timer programmingDelete timer programming Programming a new timer eventConfiguring the Favourites list Please noteCalling up programme list management Adding programmes to the Favourites list Marking blocks of programmesSorting programmes Deleting from the Total listUse the arrow keys left/right to select Yes or No Programming the electronic programme guide Programme guideSelecting a channel Please noteStart category Updating timeUpdating SFI channelParental control Default settingChanging the unit PIN Mode Selecting channelsProgramme scan search Automatic scanAutomatic scan Satellite scanSatellite scan Transponder scanTransponderscan SatelliteManual scan Scan modeAfter the scan Service settings SettingsService settings SortedActivate default setting UpdateDelete all programmes Updating the programme list IsiproAdapting programmes Deleting programmes Update softwareAdding TV resp. radio programmes Copying the settings System configuration Encryption/decoding systemOperation with a rotating antenna DiSEqC Easterly and Westerly limitsSetting the Eastern limit Setting the Western limitDeleting existing limits Delete limitsGeo-positioning Motor supports this functionGeographic longitude Geographic latitudeSetting a satellite position Latitude deg 11 ‘Setting a user-defined satellite position User satellite Adjusting the satellite antennaTest transponder/LNC configuration Use the arrow keys to mark the field Current satellite listAutomatic fine adjustment Autofocus Positioning antenna manuallySaving a satellite position SaveCurrent satellite list Addressing a satellite positionDeleting a satellite position Reference positionExternal unit installation FrequencyFrequency range Intermediate frequencySoftware update Service voltagePolarisation plane Receiver see satellite receiver SatelliteTechnical data LNC power supply Output digitalVideo parameters Output Video textTrouble-shooting guide Problem Possible cause SolutionProblem Possible cause Solution Annexure Co-ordinates of some German cities and towns City Degrees longitudeE Degrees latitude NCity Degrees longitude E Degrees latitude N Index AC3Scart Page Using the programme list Programme selection Using the programme up/down keysFor daily use

DIGIT MF4-S specifications

The TechniSat DIGIT MF4-S is a cutting-edge digital satellite receiver designed to cater to the needs of modern TV viewers. Boasting a compact design, this device is a perfect blend of form and function, enabling users to enjoy a wide array of features in an intuitive format.

One of the standout features of the DIGIT MF4-S is its support for high-definition (HD) broadcasting. With the ability to receive and decode both DVB-S2 and DVB-S signals, users can access a plethora of satellite channels, including free-to-air HD content and premium subscription services. The receiver supports various resolutions, ensuring that the viewing experience is optimized for today's high-definition televisions.

The DIGIT MF4-S is engineered with advanced technology to enhance user experience. The device incorporates a powerful processor that ensures quick channel switching and smooth navigation through menus. Its user-friendly interface is complemented by an electronic program guide (EPG), which facilitates easy navigation through current and upcoming broadcasts. This feature allows viewers to plan their viewing schedules without missing their favorite shows.

For those who value customization, the TechniSat DIGIT MF4-S offers extensive settings to personalize the user experience. Users can create their own channel lists, set reminders, and even customize parental controls to restrict access to certain content. In addition, the receiver is equipped with a USB port that enables users to connect external drives, allowing for the recording of live TV shows and timeshift functionality.

Another notable aspect of the DIGIT MF4-S is its connectivity options. The device is versatile, supporting both wired and wireless networks, which grants users the flexibility to connect to the internet for additional content. With integrated Multimedia Player compatibility, users can also play various multimedia formats, ensuring that the receiver doubles as a home entertainment hub.

Energy efficiency is also a key characteristic of the TechniSat DIGIT MF4-S, as it operates under environmentally friendly standards. With its low power consumption, users can enjoy their favorite programs without worrying about excessive electricity bills.

In conclusion, the TechniSat DIGIT MF4-S encompasses a range of advanced features, technologies, and characteristics that make it a leading choice among digital satellite receivers. Its combination of high-definition support, user-friendly interface, customization options, and connectivity features make it an excellent addition to any home entertainment setup.
Top Page Image Contents