TechniSat DIGIT MF4-S manual Automatic scan, Satellite scan, Transponder scan, Manual scan

Page 47

2. Satellite scan

Select this type of scan if you want to search for programmes only on one speific satellite.

3. Transponder scan

Select this type of scan to search on only one specific transponder of a satellite.

4. Manual scan

Use this type of scan to search specifically for a particular program- me, using programme-specific PID numbers.

When the scan has been completed, a message will be displayed on your TV screen, indicating the number of programmes your digital receiver has found, how many of these are ne, and how many of them are encrypted programmes. New programmes are stored in the Total list,and can then be included in the Favourites list in accor- dance with Point 8.1.

>In order to scan for programmes, first call up the Main Menu. (Fig. 8-13)

>Use the arrow keys up/down to mark the line Scan.

>Confirm by pressing OK.

The sub-menu Scan will be displayed. (Fig. 8-14)

>Now use the arrow keys up/down to select the type of scan you would like to perform, and confirm by pressing OK.

8.4.1 Automatic scan

When using this option, all the satellites set in the menu LNC Settings (Point 6.4 and 9.4) will be scanned for programmes. You can also decide whether you wish to scan for all programmes (free- to-air and encrypted) or only for free-to-air programmes. (Fig. 8-15)

>Press the OK, key to decide whether you wish to scan only for free-to-air programmes (Free) orwhether you wish to include encrypted programmes (All).

>To confirm, press the red function key Start scan. This scanning procedure may take more than 15 minutes. Please also note any messages displayed on screen.

8.4.2 Satellite scan

To search a single satellite for programmes, select the option Satellite scan. (Fig. 8-16)

You may decide to scan for all programmes (free-to-air and encryp- ted) or only for free-to-air programmes.

>Press the OK key again to display the selection table sho- wing all the active satellites.

(Fig. 8-13)

(Fig. 8-14)

(Fig. 8-15)

(Fig. 8-16)

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents DiSEqC Digit MF4-SContents Programme scan Electronic Programme GuideChanging basic programming Operation with a rotating antenna Service settingsSound On/Off Numeric keys Option IllustrationsVCR Dear customer Chapter Please read this firstImportant operating instructions Help Disposal adviceSafety advice When not in operationVCR Connecting the DVB receiver to a satellite installationDigital ConnectionsAnalogue Operating language. Fig Initial installationInitial installation procedure described here serves Operating languagePosition A/Option a Antenna configurationCountry selection DiSEqCUpdating Software Isipro programme list update. FigPosition A/Option B Position B/Option BOperating language Terminating the installation assistantOperating language Standby clock Remote control codeTime difference to GMT hours CountryPicture format Audio/Video settingsLanguage Audio signal TV Scart modeDolby Digital AC3 VCR Scart modeAntenna settings User Switching DiSEqC on or offSetting the switching matrix Additional LNC settings/LNC properties Rotating antenna Switching on and offSelecting a list Selecting a programme Using the Programme up/down keysUsing the numeric keys Using the Navigator Programme listReceiving encrypted programmes If you are using a Conax Smartcard, please note PointCalling up blocked programmes Information boxSelect starting time/picture Special functionsMulti-feed options Conax PIN Code Volume controlTV/Radio switching Return to last programme selected Dolby Digital AC3 modeFreeze frame Display time and programme informationAdditional programme information Transponder informationVideo text Sleep timerUsing the internal video text decoder Using the video text decoder of your television setStop paging Sub-titlesElectronic Programme Guide SFI SiehFernInfo Mixed operationSFI functions allow you to Interrupting the download procedureDownloading SFI data Display electronic programme guideMore Now table with current programme contentsNext SFI Information SFI timer programmingSFI functions Programmes Deleting a SFI timer eventUse the arrow keys up/down to mark the line Delete Timer SFI programme overviewDisplay SFI overview for other programmes SFI overview by programme type genreTerminating SFI Manual programming of timers Timer recordingsRepeat DateStart StopProgramming a new timer event Timer overviewChange timer programming Delete timer programmingPlease note Configuring the Favourites listCalling up programme list management Marking blocks of programmes Adding programmes to the Favourites listUse the arrow keys left/right to select Yes or No Deleting from the Total listSorting programmes Programme guide Programming the electronic programme guidePlease note Selecting a channelSFI channel Start categoryUpdating time UpdatingChanging the unit PIN Default settingParental control Automatic scan ModeSelecting channels Programme scan searchTransponder scan Automatic scanSatellite scan Satellite scanSatellite TransponderscanAfter the scan Scan modeManual scan Sorted Service settingsSettings Service settingsUpdating the programme list Isipro Activate default settingUpdate Delete all programmesAdapting programmes Adding TV resp. radio programmes Update softwareDeleting programmes Copying the settings Easterly and Westerly limits System configurationEncryption/decoding system Operation with a rotating antenna DiSEqCDelete limits Setting the Eastern limitSetting the Western limit Deleting existing limitsGeographic latitude Geo-positioningMotor supports this function Geographic longitudeLatitude deg 11 ‘ Setting a satellite positionUse the arrow keys to mark the field Current satellite list Setting a user-defined satellite position User satelliteAdjusting the satellite antenna Test transponder/LNC configurationSave Automatic fine adjustment AutofocusPositioning antenna manually Saving a satellite positionAddressing a satellite position Current satellite listReference position Deleting a satellite positionIntermediate frequency External unit installationFrequency Frequency rangeReceiver see satellite receiver Satellite Software updateService voltage Polarisation planeTechnical data Video text LNC power supplyOutput digital Video parameters OutputProblem Possible cause Solution Trouble-shooting guideProblem Possible cause Solution City Degrees longitudeE Degrees latitude N Annexure Co-ordinates of some German cities and townsCity Degrees longitude E Degrees latitude N AC3 IndexScart Page For daily use Programme selection Using the programme up/down keysUsing the programme list

DIGIT MF4-S specifications

The TechniSat DIGIT MF4-S is a cutting-edge digital satellite receiver designed to cater to the needs of modern TV viewers. Boasting a compact design, this device is a perfect blend of form and function, enabling users to enjoy a wide array of features in an intuitive format.

One of the standout features of the DIGIT MF4-S is its support for high-definition (HD) broadcasting. With the ability to receive and decode both DVB-S2 and DVB-S signals, users can access a plethora of satellite channels, including free-to-air HD content and premium subscription services. The receiver supports various resolutions, ensuring that the viewing experience is optimized for today's high-definition televisions.

The DIGIT MF4-S is engineered with advanced technology to enhance user experience. The device incorporates a powerful processor that ensures quick channel switching and smooth navigation through menus. Its user-friendly interface is complemented by an electronic program guide (EPG), which facilitates easy navigation through current and upcoming broadcasts. This feature allows viewers to plan their viewing schedules without missing their favorite shows.

For those who value customization, the TechniSat DIGIT MF4-S offers extensive settings to personalize the user experience. Users can create their own channel lists, set reminders, and even customize parental controls to restrict access to certain content. In addition, the receiver is equipped with a USB port that enables users to connect external drives, allowing for the recording of live TV shows and timeshift functionality.

Another notable aspect of the DIGIT MF4-S is its connectivity options. The device is versatile, supporting both wired and wireless networks, which grants users the flexibility to connect to the internet for additional content. With integrated Multimedia Player compatibility, users can also play various multimedia formats, ensuring that the receiver doubles as a home entertainment hub.

Energy efficiency is also a key characteristic of the TechniSat DIGIT MF4-S, as it operates under environmentally friendly standards. With its low power consumption, users can enjoy their favorite programs without worrying about excessive electricity bills.

In conclusion, the TechniSat DIGIT MF4-S encompasses a range of advanced features, technologies, and characteristics that make it a leading choice among digital satellite receivers. Its combination of high-definition support, user-friendly interface, customization options, and connectivity features make it an excellent addition to any home entertainment setup.
Top Page Image Contents