If under the heading Programme you have selected a pro- gramme that is blocked in terms of Point 8.3, you will first have to enter the PIN code before the data can be transfer- red to memory.
>Press the TV/Radio key to return to normal operation.
7.16.2 Timer overview
The timer overview function gives you an overview of all timer events already programmed.
>To go to the menu Timer overview, call up the menu
Manage timer as described above.
>Use the arrow keys up/down to mark the line Timer overview.
>Confirm by pressing OK.
If there are overlapping timer events, these overlaps will be mar-
ked in red.
7.16.3 Change timer programming
>To change an existing timer setting, use the arrow keys up/down to mark the timer event you wish to change.
>Press the yellow function key Change to go to the settings of the marked timer. Make the changes as described in Point 7.16.1.2.
>When you have completed the programming, press the yel- low function key Accept to accept the data into memory.
7.16.4 Delete timer programming
>To delete an existing timer setting, use the arrow keys up/down to mark the setting.
>Press the green function key Delete.
A message will be displayed: “Do you really want to delete this timer?”
>Use the arrow keys left/right to select Yes.
>To delete the timer setting, confirm by pressing OK.
7.16.5 Programming a new timer event
>To programme a new timer event, use the arrow keys up/down to mark a blank line in the menu Timer over- view.
>Press the yellow function key New to go to the entry win- dow allowing you to programme a new timer event. Complete this in accordance with Point 7.16.1.2.
37