TechniSat DIGIT MF4-S manual System configuration, Encryption/decoding system

on screen.

8.6 System configuration

Use this menu item to view the specific receiver data (e.g. current software version).

>Use the arrow keys up/down to mark this line in the sub- menu Settings.

>Confirm by pressing OK.

>Press the Menu key to return to normal operation.

8.7 Encryption/decoding system

This menu point takes you to the sub-menues for the CONAX Smartcard used, and for the CI module. You can view information related to the Smartcard or the CI module used by selecting the Smartcard or the CI interface, by pressing the arrow keys, then confirm by pressing OK.

Manual Initialisation of the CI module

>You can initialise the CI module manually by pressing the red function key CI Reset.

9 Operation with a rotating antenna (DiSEqC 1.2)

Your digital receiver is equipped for use in conjunction with a rotating antenna. You may control a suitable motor by means of the co-axial cable, using the DiSEqC control (DiSEqC-Level 1.2).

>Call up the menu Antenna Settings as described in Point 6.4 (Fig. 9-1),and switch the DiSEqC control (Point 6.4.1)

on.

>Now use the arrow keys up/down to select the DiSEqC position (e.g. A/B 3) to which you wish to allocate the rotating antenna motor.

>Pressing OK will open a selection window for the Satellite resp. the Antenna motor . (Fig. 9-2)

>Use the arrow keys up/down to mark the line Antenna motor, and confirm by pressing OK.

>Confirm the message (Fig. 9-3)regarding the setting of easterly and westerly limits by pressing OK.

9.1 Easterly and Westerly limits

To avoid mechanical damage to the antenna dish or the LNC, you must first specify the maximum easterly and westerly limits for the antenna rotation. If there are any obstructions (e.g. walls, chimnies) in the rotating radius of the dish, this must definitely be considered when setting the East-West limits.

(Fig. 9-1)

(Fig. 9-2)

(Fig. 9-3)

55