TechniSat DIGIT MF4-S manual Service settings, Sorted, Unsorted, Settings

Page 50

(Fig. 8-20)

(Fig. 8-21)

Sorted

The programmes found will be sorted into the Favourites list in accordance with a pre-programmed list. The order of listing the pro- grammes will be determined by the audio language set in Point 6.3.2 resp. by the country selected in Point 6.2.2 and 6.2.3.

Unsorted

The newly found programmes are added to the end of the Favourites list in an unsorted order.

No

The newly found programmes are not included in the Favourites list, but remain only in the Total list.

>Use the arrow keys left/right to decide whether you wish to accept the programmes in sorted or unsorted order.

>Confirm by pressing OK.

Please note any messages displayed on screen.

>Press the Menu key to return to normal opewration.

>Independently of whether you have accepted the newly found programmes into the Favourites list automatically, these can be added to the Favourites list manually at any time as described in Chapter8.1.

8.5 Service settings

You can revert to the original default settings pre-programmed at the factory at any stage. In addition, if you find that the programme list is outdated because of changes made by the programme providers, you may delete the programme list completely, and then perform a new programme scan. Please note that after you have deleted the list, you must then start a programme scan, and must then copy the desired programmes from the Total list to the Favourites list.

>Press the Menu key to call up the Main Menu. (Fig. 8-20)

>Now use the arrow keys up/down to mark the menu line

Settings.

>Confirm by pressing OK.

The sub-menu Settings will be displayed. (Fig. 8-21)

>Use the arrow keys up/down to mark the menu line

Service settings.

>Confirm by pressing OK.

The sub-menu Service settings will be displayed (Fig. 8-22)

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Digit MF4-S DiSEqCContents Programme scan Electronic Programme GuideChanging basic programming Service settings Operation with a rotating antennaIllustrations Sound On/Off Numeric keys OptionVCR Dear customer Chapter Please read this firstImportant operating instructions When not in operation Disposal adviceSafety advice HelpConnecting the DVB receiver to a satellite installation VCRDigital ConnectionsAnalogue Operating language Initial installationInitial installation procedure described here serves Operating language. FigDiSEqC Antenna configurationCountry selection Position A/Option aPosition B/Option B Isipro programme list update. FigPosition A/Option B Updating SoftwareOperating language Terminating the installation assistantOperating language Country Remote control codeTime difference to GMT hours Standby clockTV Scart mode Audio/Video settingsLanguage Audio signal Picture formatDolby Digital AC3 VCR Scart modeAntenna settings User Switching DiSEqC on or offSetting the switching matrix Additional LNC settings/LNC properties Switching on and off Rotating antennaUsing the Navigator Programme list Selecting a programme Using the Programme up/down keysUsing the numeric keys Selecting a listInformation box If you are using a Conax Smartcard, please note PointCalling up blocked programmes Receiving encrypted programmesSelect starting time/picture Special functionsMulti-feed options Conax PIN Code Volume controlTV/Radio switching Dolby Digital AC3 mode Return to last programme selectedTransponder information Display time and programme informationAdditional programme information Freeze frameUsing the video text decoder of your television set Sleep timerUsing the internal video text decoder Video textMixed operation Sub-titlesElectronic Programme Guide SFI SiehFernInfo Stop pagingDisplay electronic programme guide Interrupting the download procedureDownloading SFI data SFI functions allow you toMore Now table with current programme contentsNext SFI Information SFI timer programmingSFI functions SFI programme overview Deleting a SFI timer eventUse the arrow keys up/down to mark the line Delete Timer ProgrammesDisplay SFI overview for other programmes SFI overview by programme type genreTerminating SFI Timer recordings Manual programming of timersStop DateStart RepeatDelete timer programming Timer overviewChange timer programming Programming a new timer eventConfiguring the Favourites list Please noteCalling up programme list management Adding programmes to the Favourites list Marking blocks of programmesUse the arrow keys left/right to select Yes or No Deleting from the Total listSorting programmes Programming the electronic programme guide Programme guideSelecting a channel Please noteUpdating Start categoryUpdating time SFI channelChanging the unit PIN Default settingParental control Programme scan search ModeSelecting channels Automatic scanSatellite scan Automatic scanSatellite scan Transponder scanTransponderscan SatelliteAfter the scan Scan modeManual scan Service settings Service settingsSettings SortedDelete all programmes Activate default settingUpdate Updating the programme list IsiproAdapting programmes Adding TV resp. radio programmes Update softwareDeleting programmes Copying the settings Operation with a rotating antenna DiSEqC System configurationEncryption/decoding system Easterly and Westerly limitsDeleting existing limits Setting the Eastern limitSetting the Western limit Delete limitsGeographic longitude Geo-positioningMotor supports this function Geographic latitudeSetting a satellite position Latitude deg 11 ‘Test transponder/LNC configuration Setting a user-defined satellite position User satelliteAdjusting the satellite antenna Use the arrow keys to mark the field Current satellite listSaving a satellite position Automatic fine adjustment AutofocusPositioning antenna manually SaveCurrent satellite list Addressing a satellite positionDeleting a satellite position Reference positionFrequency range External unit installationFrequency Intermediate frequencyPolarisation plane Software updateService voltage Receiver see satellite receiver SatelliteTechnical data Video parameters Output LNC power supplyOutput digital Video textTrouble-shooting guide Problem Possible cause SolutionProblem Possible cause Solution Annexure Co-ordinates of some German cities and towns City Degrees longitudeE Degrees latitude NCity Degrees longitude E Degrees latitude N Index AC3Scart Page For daily use Programme selection Using the programme up/down keysUsing the programme list

DIGIT MF4-S specifications

The TechniSat DIGIT MF4-S is a cutting-edge digital satellite receiver designed to cater to the needs of modern TV viewers. Boasting a compact design, this device is a perfect blend of form and function, enabling users to enjoy a wide array of features in an intuitive format.

One of the standout features of the DIGIT MF4-S is its support for high-definition (HD) broadcasting. With the ability to receive and decode both DVB-S2 and DVB-S signals, users can access a plethora of satellite channels, including free-to-air HD content and premium subscription services. The receiver supports various resolutions, ensuring that the viewing experience is optimized for today's high-definition televisions.

The DIGIT MF4-S is engineered with advanced technology to enhance user experience. The device incorporates a powerful processor that ensures quick channel switching and smooth navigation through menus. Its user-friendly interface is complemented by an electronic program guide (EPG), which facilitates easy navigation through current and upcoming broadcasts. This feature allows viewers to plan their viewing schedules without missing their favorite shows.

For those who value customization, the TechniSat DIGIT MF4-S offers extensive settings to personalize the user experience. Users can create their own channel lists, set reminders, and even customize parental controls to restrict access to certain content. In addition, the receiver is equipped with a USB port that enables users to connect external drives, allowing for the recording of live TV shows and timeshift functionality.

Another notable aspect of the DIGIT MF4-S is its connectivity options. The device is versatile, supporting both wired and wireless networks, which grants users the flexibility to connect to the internet for additional content. With integrated Multimedia Player compatibility, users can also play various multimedia formats, ensuring that the receiver doubles as a home entertainment hub.

Energy efficiency is also a key characteristic of the TechniSat DIGIT MF4-S, as it operates under environmentally friendly standards. With its low power consumption, users can enjoy their favorite programs without worrying about excessive electricity bills.

In conclusion, the TechniSat DIGIT MF4-S encompasses a range of advanced features, technologies, and characteristics that make it a leading choice among digital satellite receivers. Its combination of high-definition support, user-friendly interface, customization options, and connectivity features make it an excellent addition to any home entertainment setup.
Top Page Image Contents