Panasonic AJ-HD1700 Concerning the time code and user’s bit, Time code and user’s bit playback

F1TC SRC on the <TC> menu to

F3TC/CTL on the <HOME> menu to TC.

F3 TC/CTL on the <HOME> menu to TC or

Concerning the time code and user’s bit

Setting the external time code

1 Set the VTR to the stop mode.

2 Set

3 If the video input has been set to HD SDI input or INT SG, set

EXT-L, SLTC or SVITC.

4 If	the video input has been set to SD SDI (when
the	optional board has been installed), set	TC

SRC on the <TC> menu to EXT-L or VITC.

Cue time registration, preroll and cue-up

(These functions work only on the HOME, PF1 and PF2 screens.)

•	Registration
	Register the cue time by pressing the				button
	while holding down the		button.	F
•	Presetting
	When the	button is	pressed,	the	characters of
		T
	the cue time or TC/UB display			are	highlighted.
	Turn the ADJ dial to highlight the characters of the
	cue time.
	The subsequent steps in the registration procedure
	are the same as for TCG.
•	Prerolling
	Press the PREROLL button to preroll the tape to
	the currently registered CUE point.
•	Cue-up
	Press the PREROLL button while holding down the

Fbutton to cue the tape up to the currently registered CUE point.

SET

F1

Time code and user’s bit playback

1 Set the VTR to the stop mode.

2 Set UB.

TC:

The time code is displayed.

UB:

The user’s bit is displayed.

•In the event that it has become impossible to read the time code, it is interpolated using the CTL signal.

3 Press the PLAY button. Playback starts, and the time code appears on the display.

If F1 (SUPER) on the <TC SHIFT> menu is set to

ON, the time code value is superimposed onto the video signals from the VIDEO OUT3 connector.

<Notes>

•While a drop frame time code is being read, the colon between the seconds and frames is replaced with a period.

•If the time code signal is missing, it is interpolated automatically using the CTL signal.

The following appears on the display.

T ¢ R	00:01:04:07		¢
				“ ”: 1st, 3rd field
An asterisk (	¢	)
				“¢”: 2nd, 4th fields
appears here if the
time code signal is			In the drop frame mode, the colon
missing.

between the seconds and frames is replaced with a period. (In the 59/60 Hz mode only)

112