Panasonic AJ-HD1700 manual Clearing, Resetting all the items and values

Page 73

Function menus

50P IN/OUT ASSIGN

<50P IN/OUT ASSIGN>

Registering functions in the input pins/Active inputs Registering functions in the output pins/Active outputs

1.Selecting the 50-pin connector pins

Turn the ADJ dial to move the selection marker and select the pin of the 50-pin connector into which the menu item is to be registered.

2.Entering the 50-pin connector pins Press the ADJ dial.

The entered 50-pin connector pin display is highlighted.

3.Selecting the menu item

Turn the ADJ dial and select the menu item for the pin of the 50-pin connector which was selected in step 1 above.

4.Entering the menu item Press the ADJ dial.

The on-screen setting display now blinks.

5.Selecting the setting

Turn the ADJ dial and select the setting for the menu item which was selected in step 3 above.

6.Entering the setting

Press the ADJ dial .

What is to be operated by the ADJ dial returns to the front panel. Whatever was selected in step 3 is displayed as the registered item name and whatever was selected in step 5 is displayed as the registered value.

7.To select menu items and settings for other 50-pin connector pins, repeat steps 1 to 6.

8.Saving the data in the 50-pin registration file

To save what has been set in the 50-pin connector in

the 50-pin registration file, press

(SET).

 

F5

 

If

 

(EXIT) is pressed

without the

above settings

F6

have been saved, those settings will be canceled.

 

 

 

Clearing

1.Turn the ADJ dial to move the selection marker and select the pin of the 50-pin connector whose menu item is to be cleared.

2.Press F4(RESET). The registered item name and registered value displays now go blank.

3.To clear the menu items in other 50-pin connector pins, repeat steps 1 and 2.

4.To save what has been set in the 50-pin connector in

the 50-pin registration file, press

(SET).

F5

If F6 (EXIT) is pressed without the above settings have been saved, those settings will be canceled.

Resetting all the items and values

Press

F4

(RESET) while holding down the

button.

 

F

 

All the registered item names and registered values

 

 

 

are now set to the factory settings. (These settings

 

 

 

cannot be restored.)

 

 

 

 

 

Special IN menu list

 

 

 

 

 

 

 

 

 

 

 

 

 

No.

 

 

 

 

 

 

 

SUPER

 

 

Description of setting

 

 

 

DISPLAY

 

 

 

 

 

 

 

 

 

 

 

 

 

Functions not featured on the setup menua

 

 

 

 

 

 

 

 

 

 

 

B00

 

 

For transferring to the STANDBY ON mode.

 

 

 

STBY ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B01

 

 

For transferring to the STANDBY OFF mode.

 

 

 

STBY OFF

 

 

 

 

 

 

 

 

 

 

 

 

B02

 

 

For alternately transferring to the STANDBY ON

 

STBY ONOFF

 

 

and OFF mode.

 

 

 

 

 

 

 

 

 

 

 

B03

 

 

For transferring to the EJECT mode.

 

 

 

EJECT

 

 

 

 

 

 

 

 

 

 

 

 

B04

 

 

For prerolling the tape to the IN point when the

 

CUE

 

 

IN point has been registered; for prerolling the

 

 

 

 

tape to the current point when the IN point has

 

 

 

 

 

 

not been registered.

 

 

 

 

 

 

 

 

 

 

 

B05

 

 

For registering the edit IN point.

 

 

 

IN SET

 

 

 

 

 

 

 

 

 

 

 

 

B06

 

 

For transferring to the still picture (STILL) mode.

 

STILL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B07

 

 

The 9-pin connector functions.

 

 

 

 

422 REM ON

 

 

 

 

 

 

 

 

 

 

 

 

B08

 

 

The 9-pin connector does not function.

 

 

 

422 REM OFF

 

 

 

 

 

 

 

 

 

 

 

 

B09

 

 

For returning TC SOURCE to the previous EXT

 

 

 

TC EXT

 

 

mode.

 

 

 

 

 

 

 

(No switching occurs if

the EXT mode

is

 

 

 

 

currently established

.)

 

 

 

 

 

 

 

 

 

 

B10

 

 

For switching TC SOURCE to INT and TCG

 

 

 

TC INT AUTO

MODE to AUTO.

 

 

 

 

 

 

 

 

 

 

 

B11

 

 

For switching TC SOURCE to EXT_L and TCG

 

 

 

TC EXT_L

 

 

MODE to REGEN.

 

 

 

 

REG

 

 

 

 

 

 

 

 

 

 

 

 

 

SRC PROTECT and STOP PROTECT settings switched simultaneously

 

 

 

 

 

 

 

 

 

 

 

B20

 

 

For switching the tape protection mode operation to

 

 

 

PROTECT

 

 

half-loading in the event that the VTR has been left

 

HALF

 

 

standing in the STOP mode or the STILL mode while

 

 

 

 

 

 

any of the search modes (JOG, VAR or SHTL) was

 

 

 

 

 

 

established.

 

 

 

 

 

 

 

 

 

 

 

B21

 

 

For switching the tape protection mode operation to

 

 

 

PROTECT

 

 

tension release when the VTR has been left standing

 

 

 

T-REL

 

 

in the STOP mode or the STILL mode while any of the

 

 

 

 

 

 

search modes (JOG, VAR or SHTL) was established.

 

 

 

 

 

 

 

 

 

 

 

73

Page 72 Page 74
Image 73
Page 72 Page 74
Contents VQT0E88 Model AJOperating precaution For your safetyIndicates safety information For Europe For U.S.A. and CanadaDo not Remove Panel Cover by UN Screwing FCC NoteHow to replace the fuse Contents General outline Standard accessoriesFeatures Front panel Parts and Their FunctionsFine mode Factory settingMonitor Select buttons Meter FULL/FINE selector buttonTime code display Adjust dialAudio Unity lamp @ Direct menu buttonsStill REVFWD Number keys Audio channel selector buttonPREVIEW/REVIEW button Auto Edit buttonFront panel Player and Recorder buttons Standby buttonInput Check button Video 59/60 Hz mode Input Check output specificationsVideo 50 Hz mode AudioTime code display TCG CTLUBG TCR/TRear panel @ SD REF in connectors and 75-ohm termination switches ? Analog Composite Video OUT connectorsHD REF in connectors and 75-ohm termination switches HD REF OUT connectorPlayer side ConnectionsSource side Recorder sideExample of system connections in 25 Hz SD mode Example of system connections in 23/24 Hz or 25 Hz HD modeExample of connections with an editing controller Cassettes Concerning tapesXL cassettes Dvcpro HD LPTurn on the VTR’s power Check that the Auto OFF lamp is off Turning on the power and inserting the cassettePrecautions for Still Timer setting Stop and Standby modesRecording Adjust the audio levelsPlayback Playback phase adjustment functionShuttle mode Jog modeVariable mode Jog/ShuttleManual Editing When the search mode is established on the CUE screenPreroll AssemSwitch the time counter display to TC Or CTL When using this VTR as the playerAutomatic Editing Basic editing steps are as followsRegistering the edit points Selecting the editing modePlayer RecorderChecking the edit points When no edit points have been setModifying edit points Re-registering an edit pointPostrolling Previewing Automatic editingRetry function Auto tag functionReviewing Registering the edit points Audio Split EditingClearing the edit points Modifying the edit pointsBetween the video in and OUT points Duration displayBetween the audio in and OUT points Match frame processing functionVariable memory function selection Variable memory functionOutline Variable memory playbackCleared HasEdited results can be checked VariableGeneral description Function menusGeneral menus Special menusAllocating the function keys Toggle How to switch the settingsToggle i ADJ PressStatus display HomePB FMT DvcamINT23 VTRINT24 INT2559.94 Hz/60 Hz, 50 Hz mode 59.94 Hz/60 Hz operation specifications for tape playback23.98/24Hz, 25 Hz HD mode Hz SD modeVariable memory mode indicator Operation mode speed displayRemaining tape/total tape display Cue time displaySelecting the values Registering TCG valuesInputting numbers and letters Entering the input valuesTape ResetOutput INH ALLPressed. Refer to setup menu items No.670 to Video signal output level adjustmentsVideo F4 Shift F1 Shift F2 Shift F3 ShiftF5 Shift HUEAudio Audio signal input selection CH1jCH4F1 SHIFT2 VolumeF2 SHIFT2 F3 SHIFT2 ReccueTimer DF MOD NDF DF Mode F1 ShiftTC SRC INT TC Source Extl Sltc Svitc INT Extl VitcMoving to registered points CUENumber display area Registered point display areaCue point registration When registering cue points by numberCUE Search operations Clearing registered points$ Clearing all the registered points together $Clearing individual registered pointsDiag Error log functionHour-meter display LCD monitor displaysMessages saved when on is selected as the setting Menu Automatic editing and manual editing AssembleAfter the edit in and OUT points have been Insert When the editing mode has been selectedAfter the edit Buttons lightSettings Setup MENU/SYSTEM MenuFlow of setting changes Setup Menu function buttonsFunction buttons File Lock File overwrite inhibit facilityUnlocked status FacilityPF1/PF2 Clearing all the function button settingsRegistration Clearing the menu itemsPF1/PF2 function buttons Flow of function button registrationPF1/PF2 function button names 401 400402 403701 700702 703File status CardSelecting the operation files inside the selected memory Selecting the targeted memoryAssign SaveLocking a file Editing the title of a selected fileSelect the file to be locked, and press Lock File statusItems which can be registered in the input and output pins Pins in which functions can be registered50P IN/OUT Assign Registered item namesClearing Resetting all the items and valuesSpecial OUT menu list Special in menu listTC input statuses Error statusesUp-conversion statuses Up-conversion down-conversion statusesFlow of registration 50P IN/OUT Assign function buttonsOr more Pin assignment factory settingsSystem menus Video output signal adjustmentsCoarse SYS HFine SYS SCFreq SCH SDMenu Lock Basic Setup menusSDI CharaPOS MoniFrequency PB FormatOUT REF HdrefOperation Lamp FRZ ModeEject SW INHAlarm Beep SP ModeEject Lamp KEY BeepInterface Edit CH3 CH2CH4 Edit RPLCE4Tape Protect Time Code Binary GP Phase CorrISO PAGE/LINEVideo Video OUT C ENH U/CStyle HUE StyleSetup LVL PhaseBright ContrastCC REC Video IndexAudio SEL34 SEL12SEL56 SEL78100 101 102 103 Audio outputs in the search modeConnections with Dolby-E* components MenuTo cancel the setting entered in , press How to switch the system frequencyHas been cleared, the following message appears VTR startsSystem menu and setup menu settings Menu management accompanying switching the system frequency50P IN/OUT 50-pin connector registration System menu107 Setup menusOUT REF Input Hdref Output Tape108 109 Thru Manu CC REC OFF BlankDigi PB Fade CUTTime code and user’s bit Setting the internal time codeTime code User’s bitTime code and user’s bit playback Concerning the time code and user’s bitThese functions work only on the HOME, PF1 and PF2 screens Cue-upSuperimpose screen Operation modeCharacters displayed Display positionAudio recording channels Selecting the audio recording channels and monitor outputMonitor output channels 114Been run at all for about 5 minutes Display saving functionRack mounting Keep the temperature inside the rack to betweenUnit can be mounted into a 19-inch standard rack 116Maintenance Video head cleaningCondensation Diag menu Error messagesDisplaying the Diag menu Displaying the warning information Turn the ADJ dial to move the cursor Displaying the hour-meter informationShown as a superimposed display 119120 Error messagesCAP Tension DEW121 Condition for acknowledging Commands from RS-232C interface Hardware specificationsExternal interface specifications RS-232C interfaceSend format Software specifications protocolController PC When the communication has ended successfully Error code tableSend command When the communication has ended unsuccessfullyCommands relating to operation control Command table125 126 Commands relating to inquiriesCTL/TC Data RequestCLS Microsoft QuickBASIC sample programVideo OUT Connector signalsAudio OUT RS-422A Remote 9PParallel Remote 50P Printed circuit boardsEncoder REMOTE15P Video Input Connectors SpecificationsVideo Output Connectors GeneralAudio Input Connectors Video signal adjustment ranges Cue TrackVideo Audio Digital AudioOptional Accessories Other INPUT/OUTPUT Signals132 133 Panasonic Broadcast Europe GmbH Panasonic Broadcast Europe
Related manuals
Manual 34 pages 11.06 Kb
Top Page Image Contents