Panasonic AJ-HD1700 manual Vtr, INT23, INT24, INT25, INT60, NTSC59, PAL50, INT59N, INT50P

Page 42

Function menus

Status display 1 (continued)

	VTR			Description of settings


REF	Output reference		HD23	The HD REF input signal has been selected as the reference.	The frame
		This displays the output		frequency is 23.98 Hz.
		reference status.
		reference status.	HD24	The HD REF input signal has been selected as the reference.	The frame
				frequency is 24 Hz.

			HD25	The HD REF input signal has been selected as the reference.	The frame
				frequency is 25 Hz.

			HD50	The HD REF input signal has been selected as the reference.		The field
				frequency is 50 Hz.

			HD59	The HD REF input signal has been selected as the reference.		The field
				frequency is 59.94 Hz.

			HD60	The HD REF input signal has been selected as the reference.		The field
				frequency is 60 Hz.


			IN50	The HD serial input signal has been selected as the reference.		The field
				frequency is 50 Hz.

			IN59	The HD serial input signal has been selected as the reference.		The field
				frequency is 59.94 Hz.

			IN60	The HD serial input signal has been selected as the reference.		The field
				frequency is 60 Hz.

			INT23	The signal (23.98 Hz) from the internal generator has been selected as the reference.

			INT24	The signal (24 Hz) from the internal generator has been selected as the reference.

			INT25	The signal (25 Hz) from the internal generator has been selected as the reference.

			INT50	The signal (50 Hz) from the internal generator has been selected as the reference.

			INT59	The signal (59.94 Hz) from the internal generator has been selected as the reference.

			INT60	The signal (60 Hz) from the internal generator has been selected as the reference.


			NTSC59	The SD REF input signal has been selected as the reference.		The field
				frequency is 59.94 Hz.

			PAL50	The SD REF input signal has been selected as the reference.		The field
				frequency is 50 Hz.


			INT59N	The SD REF signal has been selected by the OUT REF setting.		Since the
				SD REF signal is not input, the signal (59.94 Hz) from the internal
				generator is selected as the reference.

			INT50P	The SD REF input signal has been selected by the OUT REF setting.
				Since the SD REF signal is not input, the signal (50 Hz) from the internal
				generator is selected as the reference.

42

Image 42

Contents Model AJ VQT0E88For your safety Operating precautionIndicates safety information Do not Remove Panel Cover by UN Screwing For U.S.A. and CanadaFor Europe FCC NoteHow to replace the fuse Contents Standard accessories General outlineFeatures Parts and Their Functions Front panelMonitor Select buttons Factory settingFine mode Meter FULL/FINE selector buttonAudio Unity lamp Adjust dialTime code display @ Direct menu buttonsREV StillFWD PREVIEW/REVIEW button Audio channel selector buttonNumber keys Auto Edit buttonFront panel Standby button Player and Recorder buttonsInput Check button Video 50 Hz mode Input Check output specificationsVideo 59/60 Hz mode AudioTime code display UBG CTLTCG TCR/TRear panel HD REF in connectors and 75-ohm termination switches ? Analog Composite Video OUT connectors@ SD REF in connectors and 75-ohm termination switches HD REF OUT connectorSource side ConnectionsPlayer side Recorder sideExample of system connections in 23/24 Hz or 25 Hz HD mode Example of system connections in 25 Hz SD modeExample of connections with an editing controller XL cassettes Concerning tapesCassettes Dvcpro HD LPPrecautions for Still Timer setting Turning on the power and inserting the cassetteTurn on the VTR’s power Check that the Auto OFF lamp is off Stop and Standby modesAdjust the audio levels RecordingPlayback phase adjustment function PlaybackVariable mode Jog modeShuttle mode Jog/ShuttlePreroll When the search mode is established on the CUE screenManual Editing AssemAutomatic Editing When using this VTR as the playerSwitch the time counter display to TC Or CTL Basic editing steps are as followsPlayer Selecting the editing modeRegistering the edit points RecorderModifying edit points When no edit points have been setChecking the edit points Re-registering an edit pointRetry function Previewing Automatic editingPostrolling Auto tag functionReviewing Clearing the edit points Audio Split EditingRegistering the edit points Modifying the edit pointsBetween the audio in and OUT points Duration displayBetween the video in and OUT points Match frame processing functionOutline Variable memory functionVariable memory function selection Variable memory playbackEdited results can be checked HasCleared VariableGeneral menus Function menusGeneral description Special menusAllocating the function keys Toggle i ADJ How to switch the settingsToggle PressPB FMT HomeStatus display DvcamINT24 VTRINT23 INT2523.98/24Hz, 25 Hz HD mode 59.94 Hz/60 Hz operation specifications for tape playback59.94 Hz/60 Hz, 50 Hz mode Hz SD modeRemaining tape/total tape display Operation mode speed displayVariable memory mode indicator Cue time displayInputting numbers and letters Registering TCG valuesSelecting the values Entering the input valuesOutput ResetTape INH ALLVideo signal output level adjustments Pressed. Refer to setup menu items No.670 toVideo F5 Shift F1 Shift F2 Shift F3 ShiftF4 Shift HUEAudio signal input selection CH1jCH4 AudioF2 SHIFT2 F3 SHIFT2 VolumeF1 SHIFT2 ReccueTC SRC INT TC Source Extl Sltc Svitc DF MOD NDF DF Mode F1 ShiftTimer INT Extl VitcNumber display area CUEMoving to registered points Registered point display areaWhen registering cue points by number Cue point registrationCUE $ Clearing all the registered points together Clearing registered pointsSearch operations $Clearing individual registered pointsHour-meter display Error log functionDiag LCD monitor displaysMessages saved when on is selected as the setting Menu Assemble Automatic editing and manual editingAfter the edit in and OUT points have been After the edit When the editing mode has been selectedInsert Buttons lightSetup MENU/SYSTEM Menu SettingsSetup Menu function buttons Flow of setting changesFunction buttons File Unlocked status File overwrite inhibit facilityLock FacilityRegistration Clearing all the function button settingsPF1/PF2 Clearing the menu itemsFlow of function button registration PF1/PF2 function buttonsPF1/PF2 function button names 402 400401 403702 700701 703Card File statusAssign Selecting the targeted memorySelecting the operation files inside the selected memory SaveSelect the file to be locked, and press Lock Editing the title of a selected fileLocking a file File status50P IN/OUT Assign Pins in which functions can be registeredItems which can be registered in the input and output pins Registered item namesResetting all the items and values ClearingSpecial in menu list Special OUT menu listUp-conversion statuses Error statusesTC input statuses Up-conversion down-conversion statuses50P IN/OUT Assign function buttons Flow of registrationPin assignment factory settings Or moreVideo output signal adjustments System menusFine SYS HCoarse SYS SCSCH SD FreqMenu Lock Setup menus BasicPOS CharaSDI MoniOUT REF PB FormatFrequency HdrefOperation Eject SW FRZ ModeLamp INHEject Lamp SP ModeAlarm Beep KEY BeepInterface Edit CH4 CH2CH3 Edit RPLCE4Tape Protect Time Code ISO Phase CorrBinary GP PAGE/LINEVideo Video OUT Style U/CC ENH HUE StyleBright PhaseSetup LVL ContrastVideo Index CC RECAudio SEL56 SEL12SEL34 SEL78100 101 102 Audio outputs in the search mode 103Menu Connections with Dolby-E* componentsHas been cleared, the following message appears How to switch the system frequencyTo cancel the setting entered in , press VTR starts50P IN/OUT 50-pin connector registration Menu management accompanying switching the system frequencySystem menu and setup menu settings System menuOUT REF Input Hdref Setup menus107 Output Tape108 109 Digi CC REC OFF BlankThru Manu PB Fade CUTTime code Setting the internal time codeTime code and user’s bit User’s bitThese functions work only on the HOME, PF1 and PF2 screens Concerning the time code and user’s bitTime code and user’s bit playback Cue-upCharacters displayed Operation modeSuperimpose screen Display positionMonitor output channels Selecting the audio recording channels and monitor outputAudio recording channels 114Display saving function Been run at all for about 5 minutesUnit can be mounted into a 19-inch standard rack Keep the temperature inside the rack to betweenRack mounting 116Video head cleaning MaintenanceCondensation Error messages Diag menuDisplaying the Diag menu Displaying the warning information Shown as a superimposed display Displaying the hour-meter informationTurn the ADJ dial to move the cursor 119CAP Tension Error messages120 DEW121 External interface specifications Hardware specificationsCondition for acknowledging Commands from RS-232C interface RS-232C interfaceSoftware specifications protocol Send formatController PC Send command Error code tableWhen the communication has ended successfully When the communication has ended unsuccessfullyCommand table Commands relating to operation control125 CTL/TC Data Commands relating to inquiries126 RequestMicrosoft QuickBASIC sample program CLSAudio OUT Connector signalsVideo OUT RS-422A Remote 9PPrinted circuit boards Parallel Remote 50PEncoder REMOTE15P Video Output Connectors SpecificationsVideo Input Connectors GeneralVideo Audio Video signal adjustment ranges Cue TrackAudio Input Connectors Digital AudioOther INPUT/OUTPUT Signals Optional Accessories132 133 Panasonic Broadcast Europe Panasonic Broadcast Europe GmbH

Related manuals

Manual 34 pages 11.06 Kb