CUE
Function menus
<CUE>
Search mode
The desired search point can be selected, and the tape can be prerolled to that point.
When the display page has been changed using the
[F1 (PREV) or F2(NEXT) button on the <CUE>
menu, the following applies depending on the setting for F3 (PAGE) on the <CUE SHIFT> menu.
When “MANU” is set:
Both the search and registered points move to the top of the changed page.
When “AUTO” is set:
Only the search point moves to the top of the changed page; the registered point does not move.
Cue point registration
Turn the ADJUST dial to highlight the point which is to
be registered. When the | button | SETis | pressed, the |
When “AUTO” is set:
When a page become full during the cue point registration process, operation automatically moves to the next page, and registration continues. When CUE96 on the last page is reached, registration is
automatically terminated. (* | 2 ) |
A change must be made to the points to be registered | |
if more cue points are to be registered. Check that the cue point registration mode is established, change the page, and change the points to be registered. In this case, the search point will not be changed.
(*2)If “ON” is selected as the
on the <CUE SHIFT> menu, the registration of the cue points will rotate from page 9 (CUE96) to page 0 (CUE01).
current tape position is registered as the cue point. |
|
|
|
|
|
| ||||||||||
The following applies depending on the setting for |
|
|
|
|
|
| ||||||||||
|
|
|
|
| F3 | |||||||||||
(PAGE) on the <CUE SHIFT> menu. |
|
|
|
|
|
|
|
| ||||||||
When “MANU” is set: |
|
|
|
|
|
|
|
|
|
| ||||||
Operations are performed on the selected page. |
|
|
|
| ||||||||||||
Press the |
|
|
|
|
| to | register |
| the |
| points | in |
|
| ||
|
| SET | button |
|
|
|
| |||||||||
succession (CUE |
|
|
| ¢1 | > CUE | ¢2 | > ... > CUE | ¢6) on | ||||||||
the selected page. (Any points already registered will |
|
|
|
| ||||||||||||
be overwritten.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
The | registration is | automatically terminated | when |
|
|
|
| |||||||||
CUE | ¢6 is registered on the page. (* |
|
| 1 | ) |
|
|
| ||||||||
A change must be made to the points to be registered |
|
|
|
|
|
| ||||||||||
if more cue points are to be registered. Check that |
|
|
|
| ||||||||||||
the cue point registration mode is established, change |
|
|
|
| ||||||||||||
the page, and change the points to be registered. In |
|
|
|
| ||||||||||||
this case, the search point will | also | move |
|
| ||||||||||||
automatically to the top (CUE |
|
| ¢1) | of | the changed | |||||||||||
page. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(*1)If “ON” is selected as the |
|
|
| ](ROTATE) setting | ||||||||||||
| F4 |
| ||||||||||||||
| on the <CUE SHIFT> menu, the registration of the |
|
|
| ||||||||||||
| cue points will rotate on the same page in the |
|
|
| ||||||||||||
| following | order: CUE |
| ¢1 |
| > CUE | ¢2 > ... > | |||||||||
| CUE | ¢6> CUE | ¢1 | > CUE |
| ¢2 > ... |
|
| ||||||||
When registering cue points by number
1.Turn the ADJUST dial to highlight the desired registered point display area.
2. Press the | buttonT | twice. Only the “10’s” hour |
digit of the selected cue point is now highlighted, and the change enable status is established.
<Note>
When “REV” has been selected as the setup menu item No.144 (TC INPUT) setting, the input of the number will start from the
3.Input the number using the number keys. Movement from one digit to the next is done automatically after one number has been input.
The desired digit can also be selected by turning the ADJUST dial.
4. To enter the number, | press the | button. |
| ENT |
When the display | screen is switched or when | the | ||
Cbutton is pressed during the input process, the change enable status is released, and the setting is canceled.
53