Panasonic AJ-HD1700 manual System menus, Video output signal adjustments

System menus

No./Item

Description of setting

00

This enables one of a number of different signals

to

be

output

from

the

VIDEO OUT

2

output

WFM SEL

connector.

0000

CTL

:

The CTL signal is output.

0001

TC

:

The time code signal is output.

0002

VIDEO

:

The video output signal is output.

0003

RF_L

:

The PB L RF signal is output.

0004

RF_R

:

The PB R RF signal is output.

0005

ENV_L

:

The PB L ENV signal is output.

0006

ENV_R

:

The PB L ENV signal is output.

<Notes>

• The setting can be changed at any time without

being affected by the system menu item No.30

(MENU LOCK) setting.

• The output signals during normal playback

virtually maintain the levels given below.

CTL:

0.1 to.3Vp-p

TC: 0.6Vp-p

VIDEO:

1.0Vp-p

05

For

setting

whether

to

perform

the

various

adjustments for the video output signals using this

ENCODER

VTR

or

using an

external encoder

remote

SEL

controller.

0000

REMOTE:

The various adjustments for the video output

signals are performed by an external encoder

remote controller.

0001

LOCAL

:

The various adjustments for the video output

signals are performed using this VTR.

0002

BOTH:

The various adjustments for the video output

signals are performed using both this VTR and

an external encoder remote controller.

06

For selecting what is to be controlled when

the video output level is to be adjusted by an

V LEVEL

external encoder remote controller.

CTRL

0000

HD:

The HD video output level can be adjusted.

0001

SD:

The SD video output level can be adjusted.

0002

BOTH:

Both the HD and SD video output levels can be

adjusted.

The underlining (__) denotes the factory setting mode.

Video output signal adjustments

The control matrix for the adjustments is shown in the table below.

When “CMPNT” has been selected as the setup menu item

No.650 (STYLE) setting

Setting					Adjustment item
05:		06:		653: Y LVL (HD)		658: Y LVL (SD)
ENCODER		V LEVEL		654: Pb LVL (HD)		659: Pb LVL (SD)
SEL		CTRL		655: Pr LVL (HD)		660: Pr LVL (SD)
				656: BK LVL (HD)		661: BK LVL (SD)
REMOTE		HD		External encoder		No adjustments
				remote controller		possible
		SD		No adjustments		External encoder
				possible		remote controller
		BOTH		External encoder		External encoder
				remote controller		remote controller
LOCAL	HD
		SD		AJ-HD1700		AJ-HD1700
		BOTH
BOTH	HD			External encoder	remote	AJ-HD1700
				controller/AJ-HD1700
		SD		AJ-HD1700		External encoder remote
						controller/AJ-HD1700
		BOTH		External encoder	remote	External encoder remote
				controller/AJ-HD1700		controller/AJ-HD1700
External encoder	remote		controller:		Only	adjustments of the
external encoder remote controller are performed.
AJ-HD1700:		Only	adjustments of the		setup menu items are
performed.
External encoder remote controller/AJ-HD1700:						Adjustments can
be performed from both the external encoder remote controller and
setup menus.
<Note>
Use the AJ-ER50, an optional accessory, as the external encoder
remote controller. However, its VIDEO PHASE and SYNC PHASE
controls will not work.

When “CMPST” has been selected as the setup menu item

No.650 (STYLE) setting

	Setting		Adjustment item
05:		06:	662: V LEVEL
ENCODER		V LEVEL	663: C LEVEL
SEL		CTRL	664: HUE ( or C PHASE)
			665: SETUP LVL (or BK LVL)
REMOTE		HD	External encoder remote
		SD
			controller
		BOTH
LOCAL	HD
			AJ-HD1700
		SD
		BOTH
BOTH	HD		External encoder remote
		SD
			controller/AJ-HD1700
		BOTH
External encoder remote controller:			Only adjustments of the external
encoder remote controller are performed.
AJ-HD1700:	Only adjustments of the setup menu items are performed.
External encoder remote controller/AJ-HD1700:				Adjustments can be
performed from both the external encoder remote controller and setup
menus.
<Note>

Use the MT-200 (manufactured by Musashi and recommended by

Panasonic) as the external encoder remote controller. However, its

VIDEO PHASE, SYNC PHASE and SC PHASE controls will not work.

78