Panasonic AJ-HD1700 manual Command table, Commands relating to operation control, 125

RS-232C interface

5.Command table

∫Commands relating to operation control

<Notes>

•As the return (completion) message, [ACK] is returned when data is received, and only the execution message which is subsequently returned is listed in the table.

•If a command not listed in the table is received, ER001 (invalid command) is returned after [ACK].

VTR	Send command		Return (completion)
operation			message
STOP	[STX] OSP [ETX]	45	[STX] OSP [ETX]
	This command is for stopping the tape transport.
	The resulting output picture and sound statuses
	differ according to the setting selected for the
	setup menu item No.105 (AUTO EE SEL).
	For details, refer to the setup menus.
EJECT	[STX] OEJ [ETX]	45	[STX] OEJ [ETX]
	This command is for ejecting the cassette tape.
	The resulting output picture and sound statuses
	differ according to the setting selected for the
	setup menu item No.105 (AUTO EE SEL).
	For details, refer to the setup menus.
PLAY	[STX] OPL [ETX]	45	[STX] OPL [ETX]
	This command is for starting playback.
REWIND	[STX] ORW [ETX]	45	[STX] ORW [ETX]
	This command is for rewinding the tape. The
	resulting output picture and sound statuses differ
	according to the setting selected for the setup
	menu item No.105 (AUTO EE SEL).
	The maximum speed differs according to the
	setting selected for the setup menu item No.102
	(FF. REW MAX).
	For details, refer to the setup menus.
FAST	[STX] OFF [ETX]	45	[STX] OFF [ETX]
FORWARD
	This command is for fast forwarding		the tape.
	The resulting output picture and sound statuses
	differ according to the setting selected for the
	setup menu item No.105 (AUTO EE SEL).
	The maximum speed differs according to the
	setting selected for the setup menu item No.102
	(FF. REW MAX).
	For details, refer to the setup menus.
REC	[STX] ORC [ETX]	45	[STX] ORC [ETX]
	This command is for starting recording.

VTR	Send command				Return (completion)
operation						message
SHTL	[STX] OSF:data [ETX]			45		[STX] OSF [ETX]
FORWARD
	This is the forward direction shuttle command.
	data = n:	speed data
	0:		STILL
	1:		k0.03
	2:		k0.1
	3:		k0.2
	4:		k0.5
	5:		k1
	6: k2.0
			(1.85 k for formats other than
			DVCPROHD-LP)
	7: k4.9
	8: k9.8
	9: k16
	A:		k32
	<Note>
	The 16 k and 32			k speeds differ according to the
	setting selected for setup menu item No.101
	(SHTL MAX).
SHTL	[STX] OSR:data [ETX]			45		[STX] OSR [ETX]
REVERSE
	This is the reverse direction shuttle command.
	data = n:	speed data
	0:		STILL
	1:		k0.03
	2:		k0.1
	3:		k0.2
	4:		k0.5
	5:		k1
	6: k2.0
			(1.85 k for formats other than
			DVCPROHD-LP)
	7: k4.9
	8: k9.8
	9: k16
	A:		k32
	<Note>
	The 16 k and 32			k speeds differ according to the
	setting selected for setup menu item No.101
	(SHTL MAX).
STANDBY	[STX] OBF [ETX]			45		[STX] OBF [ETX]
OFF
	This command is for setting the VTR to standby
	OFF.
STANDBY ON	[STX] OBN [ETX]			45		[STX] OBN [ETX]
	This command is for setting the VTR to standby
	ON.

125