Panasonic AJ-HD1700 manual For your safety, Operating precaution, Indicates safety information

Page 2

For your safety

(General)

 

 

 

 

WARNING:

•TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, KEEP THIS EQUIPMENT AWAY FROM ALL LIQUIDS—USE AND STORE ONLY IN LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF DRIPPING OR SPLASHING LIQUIDS, AND DO NOT PLACE ANY LIQUID CONTAINERS ON TOP OF THE EQUIPMENT.

CAUTION:

Do not install or place this unit in a bookcase, built-in cabinet or any other confined space in order to maintain adequate ventilation. Ensure that curtains and any other materials do not obstruct the ventilation to prevent risk of electric shock or fire hazard due to overheating.

CAUTION:

THE AC OUTLET (MAINS SOCKET) SHALL

BE INSTALLED NEAR THE EQUIPMENT AND

SHALL BE EASILY ACCESSIBLE.

THIS APPARATUS MUST BE GROUNDED

To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power outlet (socket) which is effectively grounded through the normal household wiring.

Extension cords used with the equipment must be three-core and be correctly wired to provide connection to the ground. Incorrectly wired extension cords can be extremely hazardous.

The fact that the equipment operates satisfactorily does not imply that it is grounded, and the installation

is not necessarily safe. For your safety, if in any doubt about the effective grounding of the equipment

or power outlet (socket), please consult a qualified electrician.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, REFER MOUNTING OF THE OPTIONAL BOARD AND CHANGE OF SWITCH SETTINGS INSIDE THE UNIT TO QUALIFIED SERVICE PERSONNEL.

indicates safety information.

CAUTION:

EVEN WHEN THE POWER SWITCH IS IN THE OFF POSITION, A SMALL CURRENT FLOWS THE FILTER CIRCUIT.

Operating precaution

Operation near any appliance which generates strong magnetic fields may give rise to noise in the video and audio signals. If this should be the case, deal with the situation by, for instance, moving the source of the magnetic fields away from the unit before operation.

2

Image 2
Contents Model AJ VQT0E88Indicates safety information For your safetyOperating precaution Do not Remove Panel Cover by UN Screwing For U.S.A. and CanadaFor Europe FCC NoteHow to replace the fuse Contents Standard accessories General outlineFeatures Parts and Their Functions Front panelMonitor Select buttons Factory settingFine mode Meter FULL/FINE selector buttonAudio Unity lamp Adjust dialTime code display @ Direct menu buttonsFWD REVStill PREVIEW/REVIEW button Audio channel selector buttonNumber keys Auto Edit buttonFront panel Input Check button Standby buttonPlayer and Recorder buttons Video 50 Hz mode Input Check output specificationsVideo 59/60 Hz mode AudioTime code display UBG CTLTCG TCR/TRear panel HD REF in connectors and 75-ohm termination switches ? Analog Composite Video OUT connectors@ SD REF in connectors and 75-ohm termination switches HD REF OUT connectorSource side ConnectionsPlayer side Recorder sideExample of system connections in 23/24 Hz or 25 Hz HD mode Example of system connections in 25 Hz SD modeExample of connections with an editing controller XL cassettes Concerning tapesCassettes Dvcpro HD LPPrecautions for Still Timer setting Turning on the power and inserting the cassetteTurn on the VTR’s power Check that the Auto OFF lamp is off Stop and Standby modesAdjust the audio levels RecordingPlayback phase adjustment function PlaybackVariable mode Jog modeShuttle mode Jog/ShuttlePreroll When the search mode is established on the CUE screenManual Editing AssemAutomatic Editing When using this VTR as the playerSwitch the time counter display to TC Or CTL Basic editing steps are as followsPlayer Selecting the editing modeRegistering the edit points RecorderModifying edit points When no edit points have been setChecking the edit points Re-registering an edit pointRetry function Previewing Automatic editingPostrolling Auto tag functionReviewing Clearing the edit points Audio Split EditingRegistering the edit points Modifying the edit pointsBetween the audio in and OUT points Duration displayBetween the video in and OUT points Match frame processing functionOutline Variable memory functionVariable memory function selection Variable memory playbackEdited results can be checked HasCleared VariableGeneral menus Function menusGeneral description Special menusAllocating the function keys Toggle i ADJ How to switch the settingsToggle PressPB FMT HomeStatus display DvcamINT24 VTRINT23 INT2523.98/24Hz, 25 Hz HD mode 59.94 Hz/60 Hz operation specifications for tape playback59.94 Hz/60 Hz, 50 Hz mode Hz SD modeRemaining tape/total tape display Operation mode speed displayVariable memory mode indicator Cue time displayInputting numbers and letters Registering TCG valuesSelecting the values Entering the input valuesOutput ResetTape INH ALLVideo Video signal output level adjustmentsPressed. Refer to setup menu items No.670 to F5 Shift F1 Shift F2 Shift F3 ShiftF4 Shift HUEAudio signal input selection CH1jCH4 AudioF2 SHIFT2 F3 SHIFT2 VolumeF1 SHIFT2 ReccueTC SRC INT TC Source Extl Sltc Svitc DF MOD NDF DF Mode F1 ShiftTimer INT Extl VitcNumber display area CUEMoving to registered points Registered point display areaCUE When registering cue points by numberCue point registration $ Clearing all the registered points together Clearing registered pointsSearch operations $Clearing individual registered pointsHour-meter display Error log functionDiag LCD monitor displaysMessages saved when on is selected as the setting Menu After the edit in and OUT points have been AssembleAutomatic editing and manual editing After the edit When the editing mode has been selectedInsert Buttons lightSetup MENU/SYSTEM Menu SettingsFunction buttons Setup Menu function buttonsFlow of setting changes File Unlocked status File overwrite inhibit facilityLock FacilityRegistration Clearing all the function button settingsPF1/PF2 Clearing the menu itemsFlow of function button registration PF1/PF2 function buttonsPF1/PF2 function button names 402 400401 403702 700701 703Card File statusAssign Selecting the targeted memorySelecting the operation files inside the selected memory SaveSelect the file to be locked, and press Lock Editing the title of a selected fileLocking a file File status50P IN/OUT Assign Pins in which functions can be registeredItems which can be registered in the input and output pins Registered item namesResetting all the items and values ClearingSpecial in menu list Special OUT menu listUp-conversion statuses Error statusesTC input statuses Up-conversion down-conversion statuses50P IN/OUT Assign function buttons Flow of registrationPin assignment factory settings Or moreVideo output signal adjustments System menusFine SYS HCoarse SYS SCMenu Lock SCH SDFreq Setup menus BasicPOS CharaSDI MoniOUT REF PB FormatFrequency HdrefOperation Eject SW FRZ ModeLamp INHEject Lamp SP ModeAlarm Beep KEY BeepInterface Edit CH4 CH2CH3 Edit RPLCE4Tape Protect Time Code ISO Phase CorrBinary GP PAGE/LINEVideo Video OUT Style U/CC ENH HUE StyleBright PhaseSetup LVL ContrastVideo Index CC RECAudio SEL56 SEL12SEL34 SEL78100 101 102 Audio outputs in the search mode 103Menu Connections with Dolby-E* componentsHas been cleared, the following message appears How to switch the system frequencyTo cancel the setting entered in , press VTR starts50P IN/OUT 50-pin connector registration Menu management accompanying switching the system frequencySystem menu and setup menu settings System menuOUT REF Input Hdref Setup menus107 Output Tape108 109 Digi CC REC OFF BlankThru Manu PB Fade CUTTime code Setting the internal time codeTime code and user’s bit User’s bitThese functions work only on the HOME, PF1 and PF2 screens Concerning the time code and user’s bitTime code and user’s bit playback Cue-upCharacters displayed Operation modeSuperimpose screen Display positionMonitor output channels Selecting the audio recording channels and monitor outputAudio recording channels 114Display saving function Been run at all for about 5 minutesUnit can be mounted into a 19-inch standard rack Keep the temperature inside the rack to betweenRack mounting 116Condensation Video head cleaningMaintenance Displaying the Diag menu Displaying the warning information Error messagesDiag menu Shown as a superimposed display Displaying the hour-meter informationTurn the ADJ dial to move the cursor 119CAP Tension Error messages120 DEW121 External interface specifications Hardware specificationsCondition for acknowledging Commands from RS-232C interface RS-232C interfaceController PC Software specifications protocolSend format Send command Error code tableWhen the communication has ended successfully When the communication has ended unsuccessfully125 Command tableCommands relating to operation control CTL/TC Data Commands relating to inquiries126 RequestMicrosoft QuickBASIC sample program CLSAudio OUT Connector signalsVideo OUT RS-422A Remote 9PEncoder REMOTE15P Printed circuit boardsParallel Remote 50P Video Output Connectors SpecificationsVideo Input Connectors GeneralVideo Audio Video signal adjustment ranges Cue TrackAudio Input Connectors Digital Audio132 Other INPUT/OUTPUT SignalsOptional Accessories 133 Panasonic Broadcast Europe Panasonic Broadcast Europe GmbH
Related manuals
Manual 34 pages 11.06 Kb