Controls and their functions (continued)
<Connector area>
!5ANALOG COMPONENT VIDEO OUT connector
The analog component video signal is output from this connector.
!6ANALOG COMPOSITE VIDEO OUT connectors
The analog composite video signals are output from these connectors.
The video signal with signals superimposed on it can be output from the VIDEO OUT3 connector.
The superimpose function can be set ON or OFF on the setup menu No. 006 (SUPER).
!7DIGITAL AUDIO IN/OUT connector
This I/O connector is for digital audio signals which comply with the AES/EBU standard.
!8SERIAL DIGITAL COMPONENT AUDIO/VIDEO IN/OUT connector (optional
This I/O connector is for digital component audio and video signals which comply with the EBU Tech.
The connectors are known by different names when the
!9Remote control connectors
The unit can be controlled from an external source by connecting the unit with another unit or an external controller.
There are two remote control connectors, one for IN/OUT uses and the other for OUT uses.
IN/OUT: For connection with an external controller. For connection with
OUT: For connection with parallel running operations.
@0ENCODER REMOTE connector
The external encoder/controller is hooked up to this connector when the video output signal and other settings are to be adjusted from an external source.
@1RS-232C connector
@2PARALLEL REMOTE connector
This is used when operating the unit from an external source.
– 18 –