Panasonic AJ-D850P manual Command table, Commands relating to operation control Notes

Page 95

5.Command table

(1)Commands relating to operation control <Notes>

•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is subsequently returned. It is only the execution message which is listed in this table.

•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.

	VTR	Send command			Return (completion)		Supplementary notes
	operation	Send command			message		Supplementary notes
	operation				message


	STOP	[STX] OSP [ETX]			[STX] OSP [ETX]		This command is for stopping the tape travel.
							The resulting output picture and sound statuses
							differ according to the settings selected for the setup
							menu No. 105 (AUTO EE SEL).

	EJECT	[STX] OEJ [ETX]			[STX] OEJ [ETX]		This command is for ejecting the cassette tape.
							The resulting output picture and sound statuses
							differ according to the settings selected for the setup
							menu No. 105 (AUTO EE SEL).

	PLAY	[STX] OPL [ETX]			[STX] OPL [ETX]		This command is for starting playback.

	REWIND	[STX] ORW [ETX]			[STX] ORW [ETX]		This command is for rewinding the tape.
							The resulting output picture and sound statuses
							differ according to the settings selected for the setup
							menu No. 105 (AUTO EE SEL).
							The maximum tape speed differs according to the
							setting selected for setup menu No. 102 (FF. REW
							MAX).

	FAST	[STX] OFF [ETX]			[STX] OFF [ETX]		This command is for fast forwarding the tape.
	FORWARD						The resulting output picture and sound statuses
							differ according to the settings selected for the setup
							menu No. 105 (AUTO EE SEL).
							The maximum tape speed differs according to the
							setting selected for setup menu No. 102 (FF. REW
							MAX).

	REC	[STX] ORC [ETX]			[STX] ORC [ETX]		This command is for starting the recording.

	SHTL	[STX] OSF:data [ETX]			[STX] OSF [ETX]		This is the forward direction shuttle command.
	FORWARD	[STX] OSF:data [ETX]			[STX] OSF [ETX]		This is the forward direction shuttle command.
	FORWARD
		data = n:	speed data
		0:	STILL	(DVCPRO), ⋅0.03
		1:	⋅0.03	(DVCPRO), ⋅0.03		(DV, DVCAM)
		2:	⋅0.1	(DVCPRO), ⋅0.1		(DV, DVCAM)
		3:	⋅0.2	(DVCPRO), ⋅0.3		(DV, DVCAM)
		4:	⋅0.5	(DVCPRO), ⋅0.5		(DV, DVCAM)
		5:	⋅1	(DVCPRO), ⋅1		(DV, DVCAM)
		6:	⋅1.85	(DVCPRO), ⋅1.85		(DV, DVCAM)
		7:	⋅4.1	(DVCPRO), ⋅3.1		(DV, DVCAM)
		8:	⋅9.5	(DVCPRO), ⋅9.5		(DV, DVCAM)
		9:	⋅16	(DVCPRO), ⋅16		(DV, DVCAM) : This speed differs according to the setting
							selected for setup menu No. 101 (SHTL MAX).
		A: ⋅32		(DVCPRO), ⋅32		(DV, DVCAM) : This speed differs according to the setting
							selected for setup menu No. 101 (SHTL MAX).

– 95 –

Image 95

Contents Operating Instructions Do not Open FCC NoteContents Features General and FeaturesMulti-function input/output interfaces Menu-driven setupRecording and playing back V blanking data Time codesFront Panel Top Section Controls and their functionsFront panel Channel condition lamps Input Select displayCassette insertion slot Eject buttonFront Panel Center Section @1TAPE/EE switch In the stop mode 8TC/CTL switch9TC/UB switch @0INT/EXT switch@4Search button @2REMOTE/LOCAL switch@6SHTL/SLOW switch @3REMOTE lamp#2IN a IN/SET/OUT a OUT buttons @9PREROLL button#0AUTO Edit button #1PREVIEW/REVIEW buttons#9Cassette insertion display lamp $5Headphones jack#7Time code buttons #8Warning lamp$8METER FULL/FINE selector switch $6Volume control$7MONITOR Select switches Front Panel Bottom Section 0DIAG button 7REC Inhibit switch8MENU button 9SET buttonConnector area CUE in connector AC in connectorSignal GND terminal Analog Audio in connectors9Remote control connectors 5ANALOG Component Video OUT connector6ANALOG Composite Video OUT connectors 7DIGITAL Audio IN/OUT connectorInput connector Connections when one unit is usedAnalog audio input connectors Reference input connectors Recorder Connections when 2 units are used deck to deckRemote control signal 9P Digital audio Analog video signal componentConnections with editing controller WFM VSC SwitcherPlayer Source machine Make these twoCassette TapesType Description ConsumerSwitching on the power/inserting the cassette Still Timer Setting STOP/STAND by modeRecording Selecting video/audio input signals2Adjusting the video level 3Adjusting the audio levelPlayback Jog/shuttle Jog modeShuttle mode Manual editing Preroll Automatic editing Deck to Deck Automatic editing Switch settings and adjustmentsWhen the unit is used as the recorder When the unit is used as the playerSelect the editing mode Negative duration function Entering the edit pointsMatch frame processing function Calculating the duration Checking the edit pointsModifying the edit points 1Resetting both the edit in and OUT points2Resetting either the edit in or OUT point Preview Auto tag editing Executing automatic editingPostroll Retry functionReview Split editing Modifying the edit points Audio split editingEntering the edit points Deleting the edit pointsOperations Displaying the audio split edit pointsCueing up the tape to the edit points Duration displayVoice-over facility internal Operating procedureStop VTR For operation with an editing controller AG-A850Connections Example To record cross-faded audio signals onto CH2Audio cross channel editing internal Page Additional line recording/playback function Teletext signal recording/playback functionMode Additional lines Teletext signals Blanking data recording/playbackChroma level and hue Video output encoder output signal adjustmentsSetup level Video levelSETUP-MENU Init SET YESPLAY/NOSTOP Setup default settingsChanging the settings Changing the file Setup setting menusSetting and releasing the lock mode Setup menusUSER1 Loading a user fileSaving a user file Automatic loading of user file when the power is turned onDisplay Setting DescriptionSystem menu SystemSystem Setting Description Basic User menuBasic Setting Description Operation Memory stop function OperationRespns EE ModeFRZ Mode NormalInterface Edit Edit Setting Description JOG REV VAR REVJOG Step JOG FWDAmuvo AUD MEMMode AmuxTime Code Tape ProtectTC&UB DF ModeBlank TCGVaux video auxiliary data area Time CodeVideo SBC sub code data areaVideo Setting Description Audio Audio Setting Description CUE Slow DV PB ATTMoni SEL INHBlank Blank Setting Description Line 10&273 0000 Menu TCR 00 07 04 Frames Hours Seconds Minutes Time code/user bitTime code User bitTime code Setting the internal time codeSetting the external time code TC switch → EXT Recording internal/external time codesReproducing the time code/user bit Display position Operation modeSuperimpose screen Characters displayedServo reference What is the Servo REF on the setup menu No setting?Is the REF Video signal supplied? Is the input video signal available?During recording or editing Servo reference setting tablesDuring playback or special playback Audio V Fade Function CUE Printed circuit boardInner member Rack mountingCondensation Video head cleaningDisplaying the Diag menu Error messagesDiag menu Priority Monitor display Description VTR operation Displaying the Hours Meter informationItem No Description Priority Display DescriptionRestart condition Table of Auto OFF Error messagesPower OFF→ON Counter display Monitor display Description VTR operationServo Control Introduction Hardware specificationsExternal interface specifications RS-232C interfaceProtocol Software specificationsACK STX OPL ETX Error code tableWhen the communication has terminated abnormally Nack Return format VTR → controller PCCommands relating to operation control Notes Command tableStandby STX OBN ETX STX OSR ETXReverse Standby STX OBF ETXCommands relating to inquiries Notes CLS Microsoft QuickBASIC sample programPin No Signal Connector signalsPin No. Signal SignalPin No Abbreviation Circuit Description RS-232C Remote 25-pin D-SUB crossover cable supportedOther input/output connector SpecificationsParts Information & Ordering