Panasonic AJ-D850P manual User menu, Basic

Setup menus

USER menu

<BASIC>

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display			display
000	P-ROLL	0000			0S		This sets the preroll time which can be set from 0 to 15
		.		.
	TIME	.		.			seconds in 1-second increments.
		.		.
		0005			5S		<Note>
		.		.
		.		.			When the unit is set to automatic editing [PREVIEW, AUTO
		.		.
		0015			15S		EDIT], the unit will not operate if the preroll time is set to 0
							seconds.
001	CHARA	0000		.		0	This sets the position of the characters on the horizontal plane
		.
	H-POS	.		.			for the time code and other super displays output to the
		.		.
		0005				5	VIDEO OUT 3 connector.
		.		.
		.		.			<Notes>
		.		.
		0011		11			1. When setting this item, the DISPLAY SEL status is output
							to VIDEO OUT 3 even if SUPER OFF has been set. How-
							ever, when the menu is exited, operation complies with the
							SUPER OFF/ON setting.
							Also, CHARA TYPE is output to VIDEO OUT 3 according to
							the status set in the menu.
							2. When the DISPLAY SEL setting causes characters to
							extend beyond the edges of the screen, the setting value is
							changed so that the characters are automatically displayed
							in a position on the screen.
002	CHARA	0000		.		0	This sets the position of the characters on the vertical plane
		.
	V-POS	.		.			for the time code and other super displays output to the
		.		.
		0018		18			VIDEO OUT 3 connector.
		.			.
		.		.			<Notes>
		.		.
		0022		22			1. When setting this item, the DISPLAY SEL status is output
							to VIDEO OUT 3 even if SUPER OFF has been set. How-
							ever, when the menu is exited, operation complies with the
							SUPER OFF/ON setting.
							Also, CHARA TYPE is output to VIDEO OUT 3 according to
							the status set in the menu.
							2. When the DISPLAY SEL setting causes characters to
							extend beyond the edges of the screen, the setting value is
							changed so that the characters are automatically displayed
							in a position on the screen.
003	DISPLAY	0000			TIME		This is used to select what is to appear as the time code or
	SEL	0001			T&STA		other superimposed display at the VIDEO OUT 3 connector.
		0002			T&S&M		0: Time only
		0003			T&RT		1: Time and operating status
							2: Time, operating status and mode
		0004			T&YMD
							3: Time and recording time
		0005			T&MDY
							4: Time and recording date (year/month/day)
		0006			T&DMY
							5: Time and recording date (month/day/year)
							6: Time and recording date (day/month/year)
							<Notes>
							• “DVCPRO MODE,” “DV MODE” or “DVCAM MODE” is
							displayed as the mode when a DVCPRO, DV or DVCAM
							format tape is used, respectively.
							• When setting 2 (T&S&M) is used, an error message will
							appear when a warning or error has occurred.
							• The recording time and recording date are displayed only
							when a DV or DVCAM format tape is played back. The
							operating status is displayed when a DVCPRO format tape
							is played back.

The underline on the setting item denotes the initial setting.

– 57 –