Panasonic AJ-D850P Displaying the audio split edit points, Cueing up the tape to the edit points

Page 42

Audio split editing

Displaying the audio split edit points

The edit points are displayed on the front panel as shown below. (The figure shows an audio IN point.)

Operations

Video IN point: Press the IN button.

Video OUT point: Press the OUT button.

Audio IN point: Press the A IN button.

Audio OUT point: Press the A OUT button.

AIN 00:00:04:07

IN, OUT, AIN (audio IN point), AOUT (audio OUT point)

<Note>

If the editing mode is switched to assemble editing after audio edit points have been entered, these points will be deleted.

Cueing up the tape to the edit points

Cue-up to video IN point: Cue-up to video OUT point:

Cue-up to audio IN point:

Cue-up to audio OUT point:

Press the PREROLL button while holding down the IN button. Press the PREROLL button while holding down the OUT button.

Press the PREROLL button while holding down the A IN button.

Press the PREROLL button while holding down the A OUT button.

Duration display

The duration can be displayed on the front panel only.

Duration from video IN point to OUT point: Press the IN and OUT buttons simultaneous- ly.

Duration from audio IN point to OUT point: Press the A IN and A OUT buttons simulta- neously.

Match frame processing mechanism

When two VTRs are used for audio split editing operations, there will be a total of eight edit points: two pairs of video IN and OUT points, one for the player and the other for the recorder, and two pairs of audio IN and OUT points, one for the player and the other for the recorder. Since the remaining three points are automatically calculated when five of these eight edit points are entered, up to five edit points can be entered.

<Note>

If, during audio split editing, only the video OUT point (or audio OUT point) is entered and automatic editing is executed without the audio IN point (or video IN point) having been entered, editing will continue until the audio OUT point (or video OUT point) is entered or the STOP button is pressed to suspend operation.

– 42 –

Image 42
Contents Operating Instructions FCC Note Do not OpenContents General and Features FeaturesTime codes Menu-driven setupRecording and playing back V blanking data Multi-function input/output interfacesControls and their functions Front panelFront Panel Top Section Eject button Input Select displayCassette insertion slot Channel condition lampsFront Panel Center Section @0INT/EXT switch 8TC/CTL switch9TC/UB switch @1TAPE/EE switch In the stop mode@3REMOTE lamp @2REMOTE/LOCAL switch@6SHTL/SLOW switch @4Search button#1PREVIEW/REVIEW buttons @9PREROLL button#0AUTO Edit button #2IN a IN/SET/OUT a OUT buttons#8Warning lamp $5Headphones jack#7Time code buttons #9Cassette insertion display lamp$6Volume control $7MONITOR Select switches$8METER FULL/FINE selector switch Front Panel Bottom Section 9SET button 7REC Inhibit switch8MENU button 0DIAG buttonConnector area Analog Audio in connectors AC in connectorSignal GND terminal CUE in connector7DIGITAL Audio IN/OUT connector 5ANALOG Component Video OUT connector6ANALOG Composite Video OUT connectors 9Remote control connectorsConnections when one unit is used Analog audio input connectors Reference input connectorsInput connector Digital audio Analog video signal component Connections when 2 units are used deck to deckRemote control signal 9P RecorderConnections with editing controller Make these two SwitcherPlayer Source machine WFM VSCConsumer TapesType Description CassetteSwitching on the power/inserting the cassette STOP/STAND by mode Still Timer Setting3Adjusting the audio level Selecting video/audio input signals2Adjusting the video level RecordingPlayback Jog mode Shuttle modeJog/shuttle Manual editing Preroll Automatic editing Deck to Deck When the unit is used as the player Switch settings and adjustmentsWhen the unit is used as the recorder Automatic editingSelect the editing mode Entering the edit points Match frame processing functionNegative duration function Checking the edit points Calculating the duration1Resetting both the edit in and OUT points 2Resetting either the edit in or OUT pointModifying the edit points Preview Retry function Executing automatic editingPostroll Auto tag editingReview Split editing Deleting the edit points Audio split editingEntering the edit points Modifying the edit pointsDuration display Displaying the audio split edit pointsCueing up the tape to the edit points OperationsOperating procedure Voice-over facility internalStop For operation with an editing controller AG-A850 VTRExample To record cross-faded audio signals onto CH2 Audio cross channel editing internalConnections Page Blanking data recording/playback Teletext signal recording/playback functionMode Additional lines Teletext signals Additional line recording/playback functionVideo level Video output encoder output signal adjustmentsSetup level Chroma level and hueSetup default settings Changing the settingsSETUP-MENU Init SET YESPLAY/NOSTOP Setup setting menus Changing the fileSetup menus Setting and releasing the lock modeLoading a user file USER1Automatic loading of user file when the power is turned on Saving a user fileSystem Setting DescriptionSystem menu DisplaySystem Setting Description User menu BasicBasic Setting Description Operation Operation Memory stop functionNormal EE ModeFRZ Mode RespnsInterface Edit Edit Setting Description JOG FWD VAR REVJOG Step JOG REVAmux AUD MEMMode AmuvoTape Protect Time CodeTCG DF ModeBlank TC&UBSBC sub code data area Time CodeVideo Vaux video auxiliary data areaVideo Setting Description Audio Audio Setting Description INH DV PB ATTMoni SEL CUE SlowBlank Blank Setting Description Line 10&273 0000 Menu User bit Time code/user bitTime code TCR 00 07 04 Frames Hours Seconds MinutesRecording internal/external time codes Setting the internal time codeSetting the external time code TC switch → EXT Time codeReproducing the time code/user bit Characters displayed Operation modeSuperimpose screen Display positionIs the input video signal available? What is the Servo REF on the setup menu No setting?Is the REF Video signal supplied? Servo referenceServo reference setting tables During playback or special playbackDuring recording or editing Audio V Fade Function Printed circuit board CUERack mounting Inner memberVideo head cleaning CondensationError messages Diag menuDisplaying the Diag menu Priority Display Description Displaying the Hours Meter informationItem No Description Priority Monitor display Description VTR operationCounter display Monitor display Description VTR operation Table of Auto OFF Error messagesPower OFF→ON Restart conditionServo Control RS-232C interface Hardware specificationsExternal interface specifications IntroductionSoftware specifications ProtocolReturn format VTR → controller PC Error code tableWhen the communication has terminated abnormally Nack ACK STX OPL ETXCommand table Commands relating to operation control NotesStandby STX OBF ETX STX OSR ETXReverse Standby STX OBN ETXCommands relating to inquiries Notes Microsoft QuickBASIC sample program CLSSignal Connector signalsPin No. Signal Pin No SignalRS-232C Remote 25-pin D-SUB crossover cable supported Pin No Abbreviation Circuit DescriptionSpecifications Other input/output connectorParts Information & Ordering