Panasonic AJ-D850P manual Video Setting Description

Setup menus

USER menu

<VIDEO> (continued)

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display			display
604	V-MUTE	0000			N-MUTE	This selects whether the video output signals are to be muted
	SEL	0001			LOW RF	when the blank portion of the tape is detected during play-
						back.
						0: No muting. (Freeze)
						1: Muting. (Set to gray.)
605	CC (F1)	0000			BLANK	This selects ON or OFF for the closed capture signal in the
	BLANK	0001			THRU	first field.
						0: Forced blanking performed.
						1: Blanking not performed.
606	CC (F2)	0000			BLANK	This selects ON or OFF for the closed capture signal in the
	BLANK	0001			THRU	second field.
						0: Forced blanking performed.
						1: Blanking not performed.
608	FREEZE	0000			FIELD	This selects the freeze mode for still pictures.
	SEL	0001			FRAME	0: Field freeze.
						1: Frame freeze.
						<Note>
						When frame freeze has been selected, the frame slow status
						is established with the slow setting.
610	OUT C	0000			B/W	This selects chroma color killer processing for the video output
	KILL	0001			COLOR	signals.
						0: The signals are forcibly processed as B/W signals.
						1: The signals are automatically processed.
611	EDH	0000			OFF	This selects whether to superimpose EDH onto the serial
		0001			ON	output signals.
						0: EDH is not superimposed.
						1: EDH is superimposed.
						<Note>
						This item is valid when the optional serial interface board has
						been installed.
613	VIN SETUP	0000			THRU	This selects whether the composite signal is to be recorded
		0001			CUT	with setup or without setup.
						0: When recording signals with no setup.
						1: When recording signals with 7.5% setup.
						<Note>
						When recording composite signals, be sure to double-check
						whether the signals are to be recorded with or without setup.
614	VOUT	0000			THRU	This selects the composite output signal.
	SETUP	0001			ADD	0: The signal is output without setup.
						1: The signal is output with 7.5% setup.
						<Note>
						When setting this menu item, bear the setup menu No. 616
						(CMPNT SETUP) setting in mind.
616	CMPNT	0000			THRU	When composite, component and serial (digital) signals are to
	SETUP	0001			CUT	be output:
						0: They are output in their original form.
						1: They are output without the 7.5% setup signal.
617	INTER-	0000			OFF	Although vertical interpolation is performed automatically
	POLATE	0001			AUTO	during slow-motion playback and the vertical motion of the
						playback picture is reduced, this menu item enables the
						interpolation operation to be forcibly turned off.
						0: The interpolation operation is forcibly turned off.
						1: The interpolation operation is automatically turned on
						during slow-motion playback.

The underline on the setting item denotes the initial setting.

– 70 –