Panasonic AJ-D850P manual Operation

USER menu

<OPERATION>

	Item		Setting
								Description
No.	Superimposed	No.		Superimposed
	display			display
100	SEARCH	0000			DIAL			This selects the direct search dial operation.
	ENA	0001			KEY			0: For direct search dial operations.
								1: Operation is not transferred to the search mode unless the
								search button is pressed.
101	SHTL MAX	0000				⋅		This sets the maximum speed for shuttle operations.
				16				0: 16⋅ normal speed
		0001				⋅32
		0002				⋅60		1: 32⋅ normal speed
								2: 60⋅ normal speed
								<Note>
								During DV or DVCAM format, the maximum speed is 32⋅
								normal speed even when 60⋅ is selected.
102	FF. REW	0000				⋅32		This sets the maximum speed for FF and REW operations.
	MAX	0001				⋅		0: 32⋅ normal speed
						60		1: 60⋅ normal speed
		0002			⋅100
								2: 100⋅ normal speed
								<Note>
								During DV or DVCAM format, the maximum speed is 32⋅
								normal speed regardless of this setting.
103	AUDIO	0000			OFF			This sets the status until the audio signal is output when
	MUTE	0001				ON		operation switches from the stop or search modes to the play
								mode.
								0: The time until the audio is output is shortened.
								1: The audio is output after the status stabilizes.
								<Note>
								When set to 0 (OFF), the sound in the initially output part is
								incomplete. Therefore, this setting is not recommended for
								broadcasts.
104	REF	0000			OFF			This selects whether to warn the operator when the
	ALARM	0001				ON		REF.VIDEO signal has not been connected.
								0: Warning is not given.
								1: Warning is given by the flashing STOP lamp.
105	AUTO EE	0000			S/F/R			This selects the VTR mode in which the EE status is
	SEL	0001			STOP			established when the TAPE/EE switch is set to EE.
		0002			BLACK			0: EE status is established in the STOP, FF or REW mode.
								However, EE status is always established in EJECT mode
								regardless of the TAPE/EE switch setting.
								1: EE status is established only in the stop mode. However,
								EE status is always established in EJECT mode regard-
								less of the TAPE/EE switch setting.
								2: EE status is established only in the stop mode. However,
								depending on TAPE/EE switch setting EJECT mode is as
								follows:
								TAPE/EE switch EE: EE status
								TAPE/EE switch TAPE: BLACK status for video
								MUTE status for audio
106	PLAY	0000					0	This set the play delay time in frame increments.
		.			.
	DELAY	.		.
		.		.
		0015		15

The underline on the setting item denotes the initial setting.

– 59 –