Panasonic AJ-D850P manual For operation with an editing controller AG-A850, Vtr

For operation with an editing controller (AG-A850)

MIC

AMP

Microphone

TV monitor

Ref.

*Connect to the channel (CH1 or CH2) on which the sound is to be recorded.

ANALOGUE

AUDIO IN*

VIDEO

OUT

REMOTE
IN/OUT	AJ-D850

RECORDER

CONTROLLER

AG-A850

1	Select INT_VO as the setup menu No. 322 (AUD MEM MODE) setting.
2	Select the same setting for the channel (CH1 or CH2) on which the sound is to be
	recorded and for the setup menu No. 323 (AUD MEM CH) channel.
3	Insert the cassette tape for which the voice-over editing is to be performed into the
	VTR.
4	Set the CONTROL switch on the VTR to the REMOTE position.
5	Set the controller’s SOURCE selector to AUX1.
6	Press the insert button for the channel (CH1 or CH2) on which the sound is to be
	recorded.

7

Enter the IN and OUT points of the positions where voice-over editing is to be performed.

8 Press the PREVIEW button.

9

While watching the TV monitor, input the audio signals to be recorded between the IN point and OUT point into the channel that was selected in step 6. The audio signals to be recorded are stored in memory.

10

Press the AUTO EDIT button to proceed with editing. The audio signals stored in the memory are recorded from the memory onto the cassette tape.

<Note>

For further details on the AG-A850, refer to the operating instructions of the AG-A850.

– 45 –