Panasonic AJ-D850P Blank, Tcg, Tc&Ub, Regen, As&In, Assem, Insrt, Ext Tc, Ltc, Binary, Corr, Flag

Setup menus

USER menu

<TIME CODE>

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display			display
501	VITC	0000				10L	This sets the position where the VITC signal is to be inserted.
	POS-2	0001				11L	(The same line as for VITC POS-1 in 500 cannot be selected.)
		0002				12L
		0003				13L
		0004				14L
		0005				15L
		0006				16L
		0007				17L
		0008				18L
		0009				19L
		0010				20L
502	VITC	0000				BLANK	This selects whether to output the VITC data to the positions
	BLANK	0001				THRU	selected by VITC POS-1 in 500 and VITC POS-2 in 501.
							0: Data is not output.
							1: Data is output.
503	TCG	0000				TC&UB	This selects the signal to be regenerated when the time code
	REGEN	0001				TC	generator (TCG) in the REGEN mode.
		0002				UB	0: Both the time code and user bit are regenerated.
							1: Only the time code is regenerated.
							2: Only the user bit is regenerated.
504	REGEN	0000				AS&IN	This selects whether the time code is to be regenerated during
	MODE	0001				ASSEM	automatic editing using the unit’s control panel.
		0002				INSRT	0: Time code is regenerated with assemble or insert editing.
		0003				SW	1: Time code is regenerated with assemble editing.
							2: Time code is regenerated with insert editing.
							3: Setting complies with REGEN/PRESET switch setting.
505	EXT TC	0000				LTC	This selects the time code to be used when an external time
	SEL	0001				VITC	code is to be used.
							0: The LTC of the TIME CODE IN connector is used.
							1: The video signal VITC is used.
506	BINARY	0000			000		This sets the usage status of the user bit of the time code
	GP	0001		001			generated by the TCG.
		0002		010			0: NOT SPECIFIED (character set not specified)
		0003		011			1: ISO CHARACTER (8 bits character set based on ISO646,
							ISO2022)
		0004		100
							2: UNASSIGNED 1 (undefined)
		0005		101
							3: UNASSIGNED 2 (undefined)
		0006		110
							4: UNASSIGNED 3 (undefined)
		0007		111
							5: PAGE/LINE
							6: UNASSIGNED 4 (undefined)
							7: UNASSIGNED 5 (undefined)
507	PHASE	0000				OFF	This selects whether to control the phase correction of the
	CORR	0001				ON	LTC generated by the TCG.
							0: Phase correction control is not performed.
							1: Phase correction control is performed.
508	TCG CF	0000				OFF	This selects whether the CF flag of the TCG is to ON.
	FLAG	0001				ON	0: CF flag is OFF.
							1: CF flag is ON.
509	DF MODE	0000				DF	This selects the DF/NDF mode for CTL and TCG.
		0001				NDF	0: Drop frame mode.
							1: Non-drop frame mode.
							No. 509 is valid when the CONTROL is LOCAL or LOCAL
							ENA of item 004 to “ENA”.

The underline on the setting item denotes the initial setting.

– 68 –