Panasonic AJ-D850P manual Basic Setting Description

Setup menus

USER menu

<BASIC> (continued)

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display			display
004	LOCAL	0000			DIS	This selects the buttons which can be operated on the front
	ENA	0001			ST&EJ	panel when the REMOTE/LOCAL switch has been set to
		0002			ENA	REMOTE.
						0: No buttons can be operated.
						1: Only the STOP and EJECT buttons can be operated.
						2: All buttons except for the RECORDER and PLAYER
						buttons can be operated.
005	TAPE	0000			±12h	This selects the 12 or 24 hour display for the CTL counter.
	TIMER	0001			24h	0: 12 hour display
						1: 24 hour display
006	SUPER	0000			OFF	This selects whether the time code and other super display
		0001			ON	which are output to the VIDEO OUT 3 connector is to shown.
						0: Not shown.
						1: Shown.
007	CHARA	0000			WHITE	This selects the display type for the super display output to the
	TYPE	0001			W/OUT	VIDEO OUT 3 connector as well as for displays such as the
						setting menu, etc.
						0: White characters against a black background.
						1: White characters with a black border.
008	REMAIN	0000			OFF	This selects whether the remaining tape time is shown on the
	SEL	0001			ON	front panel.
						0: Not shown.
						1: Shown.
						When “T&S&M” is selected as the setup menu item No. 003
						(DISPLAY SEL) setting, the remaining tape time is displayed
						on the third line of the VIDEO OUT 3 connector superimposed
						display in place of the mode display.
						<Note>
						Even when “1” (ON) is selected, the remaining tape time is not
						shown while the unit is calculating the remaining tape time
						after ejecting or inserting the cassette.
009	SETUP	0000			OFF	This selects whether the SETUP-MENU No. is displayed on
	NUMBER	0001			ON	the front panel.
						0: The SETUP-MENU No. is not displayed.
						1: The SETUP-MENU No. is displayed.
010	MONI	0000			MANU	This sets whether the recorder is to be forcibly set to the EE
	CONTROL	0001			AUTO	mode and the player’s playback signals are to be output to the
						monitor by pressing the recorder’s PLAYER button when a
						monitor has been connected only to the recorder during deck-
						to-deck editing.
						0: The recorder is not forcibly set to the EE mode.
						1: The recorder is forcibly set to the EE mode, and the
						player’s playback signals are output.

The underline on the setting item denotes the initial setting.

– 58 –