Cisco Systems 6500 manual Crypto pki import pkcs12, Command Modes Command History

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

crypto pki import pkcs12

crypto pki import pkcs12

To import a PKCS12 file to the WebVPN Services Module, use the crypto ca import pkcs12 command.

crypto pki import trustpoint_label pkcs12 file_system [pkcs12_filename] pass_phrase

Syntax Description	trustpoint_label	Specifies the trustpoint label.
	file_system	Specifies the file system. Valid values for file_system are as follows:
		archive:—Exports to archive: file system.
		cns:—Exports to cns: file system.
		flash:—Exports to flash: file system.
		ftp:—Exports to ftp: file system.
		http:—Exports to http: file system.
		https:—Exports to https: file system.
		null:—Exports to null: file system.
		nvram:—Exports to nvram: file system.
		rcp:—Exports to rcp: file system.
		scp:—Exports to scp: file system.
		system:—Exports to system: file system.
		terminal—Outputs the PKCS12 file to the terminal.
		tftp:—Exports to tftp: file system.
	pkcs12_filename	(Optional) Specifies the name of the PKCS12 file to import.
	pass_phrase	Specifies the pass phrase of the PKCS12 file.
Defaults	This command has no default settings.

Command Modes

Command History

Global configuration

Release	Modification
WebVPN Module	Support for this command was introduced on the Catalyst 6500 series
Release 1.1	switches.

Usage Guidelines If you are using SSH, we recommend using SCP (secure file transfer) when importing a PKCS12 file. SCP authenticates the host and encrypts the transfer session.

If you do not specify a value for pkcs12_filename, you will be prompted to accept the default filename (the default filename is the trustpoint_label value) or to enter the filename. For the ftp: or tftp: value, include the full path in the pkcs12_filename value.

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01 2-23