Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

svc

Table 2-5 Tunnel-Mode Configuration Commands (continued)

Command

Purpose and Guidelines

Default

 

 

 

dpd-interval {client timeout}

Specifies the dead peer detection (DPD) timeout values for

Disabled for the

{gateway timeout}

the gateway or the client, if tunnel-mode WebVPN is

gateway and the

 

enabled for the user or group. The DPD timer is used to

client.

 

determine if a DPD packet needs to be sent to the peer. The

 

 

DPD timer is reset every time a Cisco SSL Tunnel Protocol

 

 

(CSTP) frame is received from the peer.

 

 

gateway timeout—Specifies the DPD timeout values for

 

 

the SG; valid values are from 0 (disabled) to 3600 seconds.

 

 

client timeout—Specifies the DPD timeout values for the

 

 

client; valid values are from 0 (disabled) to 3600 seconds.

 

 

 

 

homepage url

Configures the URL of the web page to be displayed to the

No web page is

 

user upon login. The URL string specifies the path of the

specified.

 

URL. The maximum length for the URL string is 255

 

 

characters. Entering the no form of this command removes

 

 

the command from the configuration.

 

 

 

 

keep-client-installed

Keeps the SVC installed after the connection is closed.

 

 

 

 

msie-proxy exception {ip-address

Specifies the Microsoft Internet Explorer (MSIE) browser

Disabled.

dns-name}

proxy settings.

 

 

Note This command is supported only with the MSIE

 

 

browser.

 

 

The exception keyword specifies a single DNS name or IP

 

 

address for traffic that is not sent through a proxy.

 

 

 

 

msie-proxy server {ip-address

Specifies the Microsoft Internet Explorer (MSIE) browser

Disabled.

dns_name}[: port]

proxy settings.

 

 

Note This command is supported only with the MSIE

 

 

browser.

 

 

The server keyword specifies an IP address or DNS name,

 

 

optionally followed by a colon and port number, that is used

 

 

by all the proxy settings in the browser (HTTP, Secure, FTP,

 

 

Gopher) except Socks.

 

 

 

 

msie-proxy option {auto bypass-local

Specifies the Microsoft Internet Explorer (MSIE) browser

option none

none}

proxy settings.

 

 

Note This command is supported only with the MSIE

 

 

browser.

 

 

The option none keyword specifies that the browser does

 

 

not use a proxy.

 

 

The option auto keyword specifies that the browser proxy

 

 

settings are automatically detected.

 

 

The option bypass-localkeyword specifies that the local

 

 

addresses bypass the proxy.

 

 

 

 

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

2-74

OL-7310-01

 

 

Page 74
Image 74
Cisco Systems 6500 manual Command Purpose and Guidelines Default