Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
show webvpn stats
show webvpn stats
To display information about the statistics counter, use the show webvpn stats command.
|
| show webvpn stats [type] | |
|
|
|
|
Syntax Description |
| type | (Optional) See the “Usage Guidelines” section for additional information. |
|
|
| |
|
|
|
|
Defaults |
| This command has no default settings. | |
Command Modes
Command History
EXEC
Release | Modification |
WebVPN Services | Support for this command was introduced on the Catalyst 6500 series |
Module Release 1.1 | switches. |
|
|
Usage Guidelines The valid options for type are as follows:
•cifs [detail][context {name all}]
•context {name all}
•detail [context {name all}]
•mangle [detail][context {name all}]
•
•socket [detail][context {name all}]
•tunnel [detail][context {name all}]
Examples | This example shows how to display all the statistics counters that are collected on the WebVPN Services |
| Module: |
| webvpn# show webvpn stats |
| User session statistics: |
Active user sessions | : 1 | AAA pending reqs | : 0 |
Peak user sessions | : 6 | Peak time | : 17:22:16 |
Active user TCP conns | : 2 | Terminated user sessions | : 29 |
Session alloc failures | : 0 | Authentication failures | : 3 |
VPN session timeout | : 1 | VPN idle timeout | : 9 |
User cleared VPN sessions: 0 | Exceeded ctx user limit | : 0 | |
Exceeded total user limit: 0 |
|
| |
Catalyst 6500 Series Switch WebVPN Module Command
|
| |
|
